Abstract:In piezoelectric coupled shells, the distributed actuation force usually consists of four components, including the membrane force and bending moment in the longitudinal direction, and the membrane force and bending moment in the circumferential direction. For commonly used bi-axial piezoelectric materials, such as PZT and PVDF, these four components may have phase difference of pi or -pi. This leads to force cancellation and reduces the overall control effectiveness. Supposing that one piezoelectric actuator is uni-axial, for example only d(31) is not equal to zero, and then this actuator will generate actuation force with the first two components or the latter two, depending on the actuator configuration and the shell geometry/modes. Accordingly the force cancellation can be avoided or minimized. In this research, the Macro-Fiber Composite (MFC) actuators are used as uni-axial actuators. The dynamic equation of a conical shell is firstly given. Then the actuation force is derived based on the converse piezoelectric effect and thin shell assumptions. Three types of the MFC actuators are considered, including MF'C-P1, MFC-P2 and MFC-P3. Case studies are performed to evaluate the distributed actuation forces. Both axial and transverse vibrations of the conical shell are formulated to study the force cancellation of various shell modes, and the payload effects are considered in the analysis. The results show that, by using the MFC actuators, actuation force can be enhanced because force cancellation is avoided. The force enhancement becomes even more significant for membrane dominated modes, such as axial modes of shells with heavy payloads.

Research on active vibration control of piezoelectric composite shells

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Active vibration control and experimental investigations of the composite parabolic shell with variable cross-section under thermal load

Fuzzy Controller For Active Vibration Control Of Cylindrical Shells

Active Control of Nonlinear Piezoelectric Circular Shallow Spherical Shells

Vibration Control of Toroidal Shells with Parallel and Diagonal Piezoelectric Actuators

CONTROL OF ADAPTIVE SHELLS WITH THERMAL AND MECHANICAL EXCITATIONS

Control Force Enhancement Of Conical Shells Using Piezoelectric Macro-Fiber Composite

Adaptive active vibration control for composite laminated plate: Theory and experiments

Theoretical analysis of a multi-layered thin shell coupled with piezoelectric shell actuators for distributed vibration controls

Spatially Filtered Vibration Control of Cylindrical Shells

Active Vibration Control of Piezoelectric Sandwich Plates

Wireless Active Vibration Control of Thin Cylindrical Shells Laminated with Photostrictive Actuators

Active Vibration Control of a Doubly Curved Composite Shell Stiffened by Beams Bonded With Discrete Macro Fiber Composite Sensor/Actuator Pairs

Active Vibration Control of Composite Cantilever Beams

Dynamics and Active Control of Largely Deflected Active Structures Using the Finite Element Technique

Micro-Photodeformation Actions of Photostrictive Actuator Patches Applied to Vibration Control of Cylindrical Shells

Nonlinear Piezo-Thermoelastic Shell Theory Applied to Control of Variable-Geometry Shells

Distributed vibration control and identification of coupled elastic/piezoelectric shells: Theory and experiment

Simulation and Experiment of Active Vibration Control Based on Flexible Piezoelectric MFC Composed of PZT and PI Layer

Active Vibration Suppression of Payloads with a Conical Isolator