Abstract:Directional solidification of A1-4.5Cu alloy refined by adding Al-5Ti-1B has been carried out to investigate the texture formation and grain boundary characteristic of the paramagnetic crystal under a high magnetic field. OM and EBSD were applied to analyze the microstructures solidified at different temperature gradients (G) and magnetic field intensities (B). The results show that at the temperature gradient of 27 K/cm; the orientations of fcc alpha-Al grains without magnetic field are random. However, as a high magnetic field is imposed, the easy magnetization axes < 310 > of the alpha-Al grains are aligned parallel to the direction of the magnetic field leading to < 310 > texture. Meanwhile, the ratio of coincidence site lattice (CSL) grain boundaries increases with the increment of magnetic field intensity and reaches its maximum value at 4 T, but decreases as the magnetic field enhances further. On the other hand, when the temperature gradient is elevated, columnar dendrite morphology is exhibited without magnetic field; while a 6 T high magnetic field is introduced, the columnar dendrites are broken and equiaxed grains of random orientations are obtained. The alignment behavior of the free crystals in melt could be attributed to the magnetic crystalline anisotropy of alpha-Al. Moreover, the influence of fluid flow on the texture formation and CSL grain boundary development under magnetic field is discussed. The absence of convection is benefit for grain reorientation and CSL boundary formation. The application of high static magnetic field will inhibit the macro-scale convection. However, the interaction between thermoelectric current and magnetic field will cause micro-scale fluid flow, i.e., thermoelectric magnetic convection (TEMC). The TEMC will give rise to perturbation near the solid-liquid interface leading to the appearance of freckles as well as the decreasing of the ratio of CSL boundary. Moreover, it is proposed that the formation of CSL boundary is associated with the rotation of the free grains in melt along specific crystallographic axes by magnetic torque.

Tailoring Crystal Orientation and Property of Cu-Co Immiscible Alloy During Solidification under High Magnetic Field

Tailoring the microstructure and properties of a Cu–Co immiscible alloy by high magnetic field assisted heat treatment

Properties and microstructural evolution of a ternary Cu–Co–Fe immiscible alloy solidified under high magnetic fields

Influence of high magnetic field on the liquid-liquid phase separation behavior of an undercooled Cu–Co immiscible alloy

Liquid State Dependent Solidification of a Co-B Eutectic Alloy under a High Magnetic Field

Faceted Growth Of Primary Al2cu Crystals During Directional Solidification In High Magnetic Field

Texture Formation and Grain Boundary Characteristic of A1-4.5cu Alloys Directionally Solidified under High Magnetic Field

Microstructure and magnetic field induced strain of directionally solidified ferromagnetic shape memory CoNiAl alloys

A Study of Microstructure and Crystal Orientation in Directionally Solidified Ni–Fe–Ga–Co Magnetic Shape Memory Alloys

Effect of a Transverse Magnetic Field on Solidification Structure in Directionally Solidified Al-40 Wt% Cu Alloys

Microstructure and properties of AlCoCrCuFeNi high-entropy alloy solidified under high magnetic field

EFFECT OF LONGITUDINAL MAGNETIC FIELD ON THE MICROSTRUCTURE OF DIRECTIONALLY SOLIDIFIED Al-40%Cu HYPEREUTECTIC ALLOY

Effect of a transverse magnetic field on the growth of equiaxed grains during directional solidification

High-Magnetic-Field-Induced Formation of Aligned Equiaxed Grains During Directional Solidification

-orientation growth of Tb-Dy-Fe alloys induced by high magnetic fields during directional solidification

Effects of DC Magnetic Field on Crystal Orientation and Mechanical Properties of Al-4.5Cu Alloy

Growth of large crystallites of Co37Ni34Al29 ferromagnetic shape memory alloys under super-high temperature gradient directional solidification

Effect of a Weak Transverse Magnetic Field on the Morphology and Orientation of Directionally Solidified Al–Ni Alloys

Effect of Magnetic Field on Solidification Microstructure of Cu-20wt%Nb Alloys and Properties of the In-Situ Deformed Wires

Phase formation and magnetic properties of high-entropy metallic glasses in (Fe, Co, Ni)-P-B alloy system with non-equiatomic ratio

EFFECT OF HIGH LONGITUDINAL MAGNETIC FIELD ON THE MICROSTRUCTURE OF DIRECTIONALLY SOLIDIFIED Al-4.5%Cu ALLOY