Abstract:Electronic devices are progressively fabricated on flexible substrates allowing new fields of applications. A maskless and very flexible structuring process is offered by ablation using ultra-short pulse laser irradiation. Usually, certain areas of a functional thin film coating are locally removed to yield the needed device structures. Micro laser patterning quality is not only influenced by the beam properties (beam profile, fluence) but also by pulse overlap, scan repetitions and many other factors such as substrate and coating material. This makes process parameter optimization a challenging task. In this paper, we present a systematic approach to efficiently find suitable parameters for laser-induced ablation of thin films on susceptible polymer substrates. As an example, we use a sputtered NiCr coating with a thickness of 100 $nm$ on a polyimide film made by spin coating of PI-2611 precursor (@ 2000 $rpm$ > ca. 8 ${\mu}m$, HD microsystems). Irradiation is conducted using a fs-laser with infrared wavelength of 1030 $nm$ and a pulse length of 212 $fs$. The energy per pulse is varied in the range of 0,29 ${\mu}J$ to 4,83 ${\mu}J$, yielding fluence values between 70 $mJ/cm^2$ and 1,11 $J/cm^2$. Ablation threshold fluence for a 100 $nm$ layer of NiCr was found to be ${\phi}_{th}$ ($N_P$:1)=0,50 $J/cm^2$ and the incubation factor was evaluated to be ${\xi}$=0,53. A clear distinction must be made between the material ablation at the surface of a bulk material and the selective removal of a thin film. In the second case effects such as flaking occur in practice and influence the ablation characteristic. We then investigate different varieties of thin film removal including dot-, line- and areal-ablation. The methodology is presented using a practical example, but can be applied to selective ablation of a wide range of thin film systems.

Selective Removal of Variable Thickness Multilayer Materials Based on Photoelectric Detection

An adaptive laser processing method of multilayer heterogeneous materials by monitoring dynamic spectrum at kHz-MHz level

Selective laser ablation of metal thin films using ultrashort pulses

Methodology of selective metallic thin film ablation from susceptible polymer substrate using pulsed femtosecond laser

An Atomic-Level Study of Material Ablation and Spallation in Ultrafast Laser Processing of Gold Films

A New Method for Measuring Multilayer Thickness Using a Chromatic Confocal Sensor

Laser adaptive processing technology for multilayer dissimilar materials

A Model to Predict the Ablation Width and Calculate the Ablation Threshold of Femtosecond Laser

Simulation of Layer Thickness Measurement in Thin Multi-Layered Material by Variable-Focus Laser Ultrasonic Testing

Ultrafast Thermalization Dynamics in Two-Layer Metal Films Excited by Temporally Shaped Femtosecond Laser

Processing Microstructure on Film by Femtosecond Laser

Recast layer removal using ultrafast laser in titanium alloy

Selective Delamination upon Femtosecond Laser Ablation of Ceramic Surfaces

Ablation-cooled material removal with ultrafast bursts of pulses

Automated, real-time material detection during ultrashort pulsed laser machining using laser-induced breakdown spectroscopy, for process tuning, end-pointing, and segmentation

Laser Machining at High ∼PW/cm2 Intensity and High Throughput

Investigation of the laser ablation threshold for optimizing Laser Direct Structuring in the 3D-MID technology

Ablation of gold film on different substrates by ultrafast laser

Ultrafast laser ablation, intrinsic threshold, and nanopatterning of monolayer molybdenum disulfide

Damage threshold evaluation of thin metallic films exposed to femtosecond laser pulses: The role of material thickness

Multi-pulse LIBDE of Fused Silica at Different Thicknesses of the Organic Absorber Layer