Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

Sulfur Poisoning and O2−-pumping Regeneration of La0.75Sr0.25Cr0.5Mn0.5O3−δ-Ni-CeO2 Anode

Sulfur Poisoning and O2 2--pumping Regeneration of La0.75Sr0.25Cr0.5Mn0.5O3-δ-Ni-CeO2 0.75 Sr 0.25 Cr 0.5 Mn 0.5 O 3-Δ- Ni- CeO 2 Anode

Sulfur Poisoning and Attempt of Oxidative Regeneration of La0.75Sr0.25Cr0.5Mn0.5O3−δ Anode for Solid Oxide Fuel Cell

Sulfur Poisoning and the Regeneration of the Solid Oxide Fuel Cell with Metal Catalyst-Impregnated La0.75Sr0.25Cr0.5Mn0.5O3-δ Anode

Performance and Sulfur Poisoning of Ni/CeO2 Impregnated La0.75Sr0.25Cr0.5Mn0.5O3−δ Anode in Solid Oxide Fuel Cells

Regeneration of Sulfur Poisoned La0.75Sr0.25Cr0.5Mn0.5O3-δ Anode of Solid Oxide Fuel Cell Using Electrochemical Oxidative Method

Enhanced Performance of Solid Oxide Fuel Cells with Ni/CeO2 Modified La0.75Sr0.25Cr0.5Mn0.5O3− Anodes

Investigations on sulfur poisoning mechanisms of a solid oxide fuel cell with niobium-doped ferrate perovskite anode

Fabrication and performance of membrane solid oxide fuel cells with La0.75Sr0.25Cr0.5Mn0.5O3-δ impregnated anodes

Performance of the single-chamber solid oxide fuel cell with a La 0.75 Sr0.25 Cr0.5 Mn0.5 O 3-δ -based perovskite anode

Performance of the Single-Chamber Solid Oxide Fuel Cell with a La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta)-Based Perovskite Anode

A Regenerative Coking and Sulfur Resistant Composite Anode with Cu Exsolution for Intermediate Temperature Solid Oxide Fuel Cells

Molybdenum-based Double Perovskites A2CrMoO6− (A = Ca, Sr, Ba) As Anode Materials for Solid Oxide Fuel Cells

Cobalt-impregnated La0.75Sr0.25Cr0.5Mn0.5O3−δ Anodes for Solid Oxide Fuel Cells

Rational Design of Perovskite-based Anode with Decent Activity for Hydrogen Electro-oxidation and Beneficial Effect of Sulfur for Promoting Power Generation in Solid Oxide Fuel Cells.

Investigation on a Novel Composite Solid Oxide Fuel Cell Anode with La0.6Sr0.4Co0.2Fe0.8O3−δ Derived Phases

Synthesis and characterization of La0.75Sr0.25Mn0.5Cr0.5-x CuxO3-δ for SOFC anode material

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Ni/SDC Nanoparticles Modified La[sub 0.75]sr[sub 0.25]cr[sub 0.5]fe[sub 0.5]o[sub 3−δ] As Anodes for Solid Oxide Fuel Cells

Nanofiber-based La 0.4 Sr 0.6 TiO 3 -Gd 0.2 Ce 0.8 O 1.9 -Ni composite anode for solid oxide fuel cells

Core-Shell Structured Li0.33la0.56tio3 Perovskite As A Highly Efficient And Sulfur-Tolerant Anode For Solid-Oxide Fuel Cells