Abstract:Carbon fiber reinforced polymers (CFRPs) are of utmost importance in high-performance structural applications (e.g. aerospace, automotive, wind energy), but their behaviour is not fully understood. Damage propagation models need to take into account the type, geometry and orientation of a multitude of failure mechanisms and defects. Micro-Computed Tomography (micro-CT) data could provide the necessary input for these models, but the poor contrast between the carbon fibers and the polymer matrix does not allow automatic geometry extraction. To overcome this issue, hafnium oxide nanocrystals (HfO2 NCs) were introduced as CT contrast agents to the polymer matrix to provide the required contrast. To ensure a homogeneous and stable dispersion of the NCs in the epoxy resin, a bisphosphonic acid ligand consisting of ethylene glycol oligomer segments is used. The NCs do not significantly alter important parameters such as matrix stiffness, viscosity, glass transition temperature and curing time, enabling them to be implemented without having to alter current composite resin infusion methods. NC-doped CFRPs with 5 and 10 m% of HfO2 NCs added show a drastic improvement in CT contrast, allowing for segmentation of the carbon fiber tows and visualization of micrometer-scale cracks. The contrast-enhanced HfO2 NC-doped composites thereby enable the validation of damage models by accurate micro-CT data.

What problem does this paper attempt to address?

This paper mainly discusses the problem of enhancing imaging contrast in carbon fiber reinforced composites (CFRP) by using hafnium oxide nanocrystals (HfO2NCs) as a contrast agent. CFRP is widely used in aerospace, automotive, wind energy, and other fields, but the understanding of its damage propagation model is not comprehensive enough. Micro-computed tomography (micro-CT) can provide the necessary input data, but due to the low contrast between carbon fibers and polymer matrix, geometric information cannot be automatically extracted. In this study, the authors improved the contrast by introducing HfO2NCs into epoxy resin and used a bisphosphonate acid ligand composed of ethylene glycol oligomer segments to ensure the uniform and stable dispersion of the NCs. These nanocrystals do not affect important parameters such as matrix stiffness, viscosity, glass transition temperature, and curing time, so they can be directly applied to existing composite material resin injection methods. CFRP with added HfO2NCs significantly improved the contrast in CT images, allowing clear segmentation of carbon fiber bundles and visualization of micrometer-scale cracks, thereby validating the damage model and providing accurate micro-CT data. The study also compared the effects of different types of surface chemical modifications on the stability and dispersibility of NCs in epoxy resin, and found that bisphosphonate acid ligands had better effects. By optimizing the synthesis and post-processing steps, a uniform distribution of NCs in the resin was achieved without compromising the mechanical properties of the material. Experimental results demonstrated that the addition of HfO2NCs can significantly enhance the contrast of CT images, enabling the automatic segmentation of carbon fibers, which is an important step in understanding and predicting the behavior of composite materials and helps to avoid unexpected failure of composite materials.

Contrast-Enhanced Imaging of Carbon Fiber Composites using Hafnium Oxide Nanocrystals

Contrast-Enhanced Composites via Hafnium Oxide Nanocrystal-Coated Carbon Fibers

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Effects of carbon fibers modification on the properties of unsaturated polyester self-healing composites

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

From Corrosion Casting to Virtual Dissection: Contrast‐Enhanced Vascular Imaging using Hafnium Oxide Nanocrystals

Toughening mechanisms and morphology of composite cylinders interleaved with hybrid nanoparticles

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Non-destructive testing and structural health monitoring technologies for carbon fiber reinforced polymers: a review

An integrated nanofiller spray and nanosecond pulse electrically-assisted method for synergistically interlaminar toughening and in-situ damage monitoring of CFRP composites

Hierarchical Interfacial Construction by Grafting Cellulose Nanocrystals onto Carbon Fiber for Improving the Mechanical Performance of Epoxy Composites

Mechanical Characterization of Hybrid Nano-Filled Glass/Epoxy Composites

Mechanical Enhancement of Carbon Fiber/Epoxy Composites Based on Carbon Nano Fibers by Using Spraying Methodology

Multiscale Image-Based Modelling of Damage and Fracture in Carbon Fibre Reinforced Polymer Composites

A multi-layer resin film infusion process to control CNTs distribution and alignment for improving CFRP interlaminar fracture toughness

Fibre orientation distribution function mapping for short fibre polymer composite components from low resolution/large volume X-ray computed tomography

Carbon Nanoparticles’ Impact on Processability and Physical Properties of Epoxy Resins—A Comprehensive Study Covering Rheological, Electrical, Thermo-Mechanical, and Fracture Properties (Mode I and II)

Phase-contrast and dark-field imaging for the inspection of resin-rich areas and fiber orientation in non-crimp vacuum infusion carbon-fiber-reinforced polymers

Utilizing in-situ construction of tailored block copolymer nanostructures to enhance CF/epoxy composites compressive properties

Optimized ultrasonic total focusing imaging of diverse and multiple defects in crossply CFRP: Floquet wave theory, numerical simulation, and experimental validation

An unexpected hardening behaviour of carbon-fiber epoxy composites under flexural fatigue loading and its intensification by graphene nano-fillers