Abstract:Carbon nanofibers have been utilized increasingly for enhancing the mechanical properties of advanced polymer composites, which include high strength, stiffness, toughness, and through-thickness Properties. The incorporation of nano particles with a high aspect ratio and extremely large surface area into polymers improves their mechanical properties significantly. Although a number of efforts have been made to improve various properties by mixing nano particles directly into resin, however, it could lead to high viscosities which create problems during processing. In this particular study, an attempt has been made to enhance mechanical response of nano composites by using, state of the art, a different technique i.e spraying the Carbon Nano Fibers (CNF) on dry perform before infusion. The nano composite samples were prepared using a spraying methodology i.e dispersing the 1.0 weight percent CNF solution on carbon fabric, and evaporating the solvent such that only nano fibers remain on perform, followed by Vacuum assisted resin transfer molding (VARTM). Tensile, compression, flexural and short beam strength tests were performed to evaluate the effectiveness of CNF addition on the mechanical properties of carbon / epoxy composites. Results indicated, CNF addition offered simultaneous increase in all these mechanical properties in different percentages i.e 22–28 percent improvement in tensile strength, 7-11 percent in compressive strength, 14–19 percent in Flexural strength and 45-55 percent short beam strength with respect to the neat composite. The rise in their modulus has also been discussed in detail and part of this study. For in-depth analysis, Microscopic approaches were also carried out to investigate the fracture behavior and mechanism of material. Scanning electron microscopy of fractured surfaces revealed improved primary fiber–matrix adhesion and indications of CNF-induced matrix toughening.

Contrast-Enhanced Composites via Hafnium Oxide Nanocrystal-Coated Carbon Fibers

Contrast-Enhanced Imaging of Carbon Fiber Composites using Hafnium Oxide Nanocrystals

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Enhanced interfacial properties of hierarchical MXene/CF composites via low content electrophoretic deposition

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

From Corrosion Casting to Virtual Dissection: Contrast‐Enhanced Vascular Imaging using Hafnium Oxide Nanocrystals

Hierarchical Interfacial Construction by Grafting Cellulose Nanocrystals onto Carbon Fiber for Improving the Mechanical Performance of Epoxy Composites

A New Method for Tungsten Oxide Nanopowder Deposition on Carbon-Fiber-Reinforced Polymer Composites for X-ray Attenuation

In-situ self-assembled block copolymer nanowires on high-modulus carbon fibers surface for enhanced interfacial performance of CFRPs

Recycled carbon fiber reinforced composites: Enhancing mechanical properties through co-functionalization of carbon nanotube-bonded microfibrillated cellulose

Mechanical Enhancement of Carbon Fiber/Epoxy Composites Based on Carbon Nano Fibers by Using Spraying Methodology

Interfacial Enhancement of Carbon Fiber Composites by Growing TiO2 Nanowires Onto Amine-Based Functionalized Carbon Fiber Surface in Supercritical Water

Effect of Fiber-Matrix Interface Friction on Compressive Strength of High-Modulus Carbon Composites

Toughening mechanisms and morphology of composite cylinders interleaved with hybrid nanoparticles

Improving the Vertical Thermal Conductivity of Carbon Fiber-Reinforced Epoxy Composites by Forming Layer-by-Layer Contact of Inorganic Crystals

Non-destructive testing and structural health monitoring technologies for carbon fiber reinforced polymers: a review

An integrated nanofiller spray and nanosecond pulse electrically-assisted method for synergistically interlaminar toughening and in-situ damage monitoring of CFRP composites

Enhancing interlaminar fracture toughness of CFRP laminates with hybrid carbon nanotube/graphene oxide fillers