Abstract:Carbon nanofibers have been utilized increasingly for enhancing the mechanical properties of advanced polymer composites, which include high strength, stiffness, toughness, and through-thickness Properties. The incorporation of nano particles with a high aspect ratio and extremely large surface area into polymers improves their mechanical properties significantly. Although a number of efforts have been made to improve various properties by mixing nano particles directly into resin, however, it could lead to high viscosities which create problems during processing. In this particular study, an attempt has been made to enhance mechanical response of nano composites by using, state of the art, a different technique i.e spraying the Carbon Nano Fibers (CNF) on dry perform before infusion. The nano composite samples were prepared using a spraying methodology i.e dispersing the 1.0 weight percent CNF solution on carbon fabric, and evaporating the solvent such that only nano fibers remain on perform, followed by Vacuum assisted resin transfer molding (VARTM). Tensile, compression, flexural and short beam strength tests were performed to evaluate the effectiveness of CNF addition on the mechanical properties of carbon / epoxy composites. Results indicated, CNF addition offered simultaneous increase in all these mechanical properties in different percentages i.e 22–28 percent improvement in tensile strength, 7-11 percent in compressive strength, 14–19 percent in Flexural strength and 45-55 percent short beam strength with respect to the neat composite. The rise in their modulus has also been discussed in detail and part of this study. For in-depth analysis, Microscopic approaches were also carried out to investigate the fracture behavior and mechanism of material. Scanning electron microscopy of fractured surfaces revealed improved primary fiber–matrix adhesion and indications of CNF-induced matrix toughening.

Utilizing in-situ construction of tailored block copolymer nanostructures to enhance CF/epoxy composites compressive properties

In-situ Constructing Ultra-High-aspect-ratio Core–shell Nanostructures to Achieve High-Performance Epoxy Thermosets and Their Carbon Fiber Reinforced Epoxy Composites

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

Synergistic toughening of epoxy resin by block ionomers and carbon nanofibers

Strengthening and Toughening Epoxy Composites by Constructing MOF/CF Multi-Scale Reinforcement

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

High-performance carbon fiber-reinforced epoxy resin composites based on novel, environmentally friendly, stability, and heat-moisture resistant nano emulsion encapsulated POSS sizing agent interface modification

Constructing a Porous Structure on the Carbon Fiber Surface for Simultaneously Strengthening and Toughening the Interface of Composites.

Toughing epoxy nanocomposites with Graphite-Nanocellulose layered framework

In-situ self-assembled block copolymer nanowires on high-modulus carbon fibers surface for enhanced interfacial performance of CFRPs

Synergistic Enhancement of Strength and Toughness of Fiber-Reinforced Composites by Constructing Biomimetic Intermittent Porous Structure

Mechanical Enhancement of Carbon Fiber/Epoxy Composites Based on Carbon Nano Fibers by Using Spraying Methodology

Synergistic toughening on CFRP via in-depth stitched CNTs

Green and Nondestructive Method for Constructing Multiscale Carbon Fiber Reinforcement via Encapsulating Chitosan and Grafting Carbon Nanotubes

Nanostructure transformation in epoxy/block copolymer composites with good mechanical properties

Constructing "nunchaku-like" multi-stage gradient interface via covalently grafting rigid-flexible-rigid structures onto carbon fibers: An effect strategy to improve interfacial properties of composites

Improving the interfacial property of CF composites through constructing multiscale interfacial nanostructures

An integrated nanofiller spray and nanosecond pulse electrically-assisted method for synergistically interlaminar toughening and in-situ damage monitoring of CFRP composites

Optimization Mechanism of Mechanical Properties of Basalt Fiber-Epoxy Resin Composites by Interfacially Enriched Distribution of Nano-Starch Crystals

Unravelling the Influence of Surface Modification on the Ultimate Performance of Carbon Fiber/Epoxy Composites

Constructing a Double Alternant “Rigid-Flexible” Structure for Simultaneously Strengthening and Toughening the Interface of Carbon Fiber/Epoxy Composites