Abstract:Aluminum–lithium alloys are widely used in aerospace due to their excellent comprehensive mechanical properties. The key to accelerate the composition design of aluminum–lithium alloys is to generate accurate precipitate structure models at the atomistic scale and quantify the effects of the secondary phase on the properties of the alloy. In this article, the development process of high-strength composition design of aluminum–lithium alloys is reviewed. The T1 phase is considered to provide the highest strength in Al-Cu-Li alloys, and we further discuss the characteristics of the crystal structure, orientation relationship and morphology of the main strengthening phase. Additionally, this paper highlights the atomic structure model, microstructure parameters of T1 phase and the precipitate–dislocation interaction relationships. Practically, the widely accepted atomic model of T1 phase characterized with a corrugated Al-Li layer at the interface remains controversial. Moreover, the strengthening mechanism of Al-Li alloy is discussed. Based on the shearing and bypassing interaction mechanism between the T1 precipitates and the matrix dislocations, some quantitative contribution models to the strength of Al-Cu-Li alloys are concluded. These models can effectively predict the variation of yield strength of Al-Cu-Li alloy, but the transition of T1 phase from shearing mechanism to bypassing mechanism is not considered. However, the T1 diameter threshold that activated this transition has not been completely determined, which need to be further studied by obtaining a wider range of T1 microstructures.Graphical abstract

On the Formation Trajectory of Diverse Corrosion Morphologies Associated with T Phases in an Al-Cu-Li Alloy

Corrosion And Anodizing Behavior Of T-1 (Al2culi) Precipitates In Al-Cu-Li Alloy

Theoretical Investigation of Cu Influence on the Stability Characteristics of T-phase in Crossover Alloys

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Role of intermetallic phases in initiation and propagation of intergranular corrosion of an Al-Li-Cu-Mg alloy

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

Direct Observation of Atomic-Scale Origins of Local Dissolution in Al-Cu-Mg Alloys

Time-varying electrochemically heterogeneous entities during the micro-galvanic corrosion associated with nanoscale precipitates in an Al-Cu-Li alloy

Investigation on formation mechanism of T1 precipitate in an Al-Cu-Li alloy

Intergranular Corrosion of an Al-Cu-Li Alloy: the Influence from Grain Structure

On the shear strain associated with T 1 precipitation in Al-Cu-Li(-Mg-Ag) alloys

Segregation of S precipitates at T/Al interfaces and relevant effects on localized corrosion mechanisms in Al-Cu-Mg alloy

Effect of Microstructure Evolution on Corrosion Behavior of Friction Stir Welded Joint for 2195-T8 Alloy

Localized corrosion at nm-scale hardening precipitates in Al-Cu-Li alloys

Heterogeneous nucleation of T1 precipitates in solid solution of Al-Cu-Li alloys from Ag-rich structures: An ab initio study

Insights into precipitation characteristics and strengthening mechanisms in a low Cu/Mg ratio Al-Cu-Mg-Ag alloy

Quantitative contribution of T1 phase to the strength of Al-Cu-Li alloys

Characterization of localized corrosion pathways in 2195-T8 Al–Li alloys exposed to acidic solution

Influence of Dislocation Morphology on T1 Precipitation of an Al-Cu-Li Alloy

Crystallographic relationships of T-/S-phase aggregates in an Al-Cu-Mg-Ag alloy

Precipitation of T1 Phase in 2198 Al–Li Alloy Studied by Atomic-Resolution HAADF-STEM