Abstract:Aims: This work is to give a further insight into the residual stress distribution within APS TBC system within TBC system by coupled thermo-mechanic finite element analysis. Background: Thermal barrier coatings is a typical example of ceramic-metal system. Thermal stress could be produced in the thermal barrier coatings on account of the difference in coefficient of thermal expansion between the ceramic and metal, and poses a serious threat to the performance and lifetime of the thermal barrier coatings. Objective: Many previous studies used out-of-plane stresses to estimate the delamination of the bond-coat/TGO and TGO/top-coat interfaces. However, in the present work, normal and tangential stresses under thermal-mechanic coupling analysis are adopted to investigate the interface delamination. Method: A thermo-mechanic coupled model comprised of a top-coat, thermally grown oxide, bond-coat, and substrate, is built for the stress evolution within the thermal barrier coatings using finite element method. The thermal conduction is carried out inside the thermal barrier coating model according to Fourier's law, with the temperature gradient forming in the model. Discussion: The thermo-mechanic coupled model is employed to analyze the top-coat stress, bond-coat plastic strain and interface stress. Simultaneously, a parametric study is performed on the effect of thermally grown oxide thickness and substrate surface heat transfer coefficient on the above mechanical responses. Results: The top-coat is subjected to tensile stresses around the peak, with the stress magnitudes decreasing with the oxide thickness. Normal tension acts across the oxide/bond-coat interface around the peak while normal compression acts around the valley. Their magnitudes are dependent on the oxide thickness but are not so sensitive to the substrate surface heat transfer coefficient. Conclusions: The TC/TGO interface might be subjected to tensile or compressive stresses around the peak, which depends on the TGO thickness. The TGO/BC interface is subjected to tensile stresses around the peak and compressive stresses around the valley, the magnitudes of which increase with the TGO thickness. The influence of substrate film coefficient on the stress across the TGO/BC interface is not so significant.

Effect of Diffusion Interlayer and Graded Multi-Interlayers on the Reduction of Thermal Stress in Tritium Penetration Barrier Coating System

Simulation of the effects of different substrates, temperature, and substrate roughness on the mechanical properties of Al2O3 coating as tritium penetration barrier

Effect of Geometric Parameter on Thermal Stress Generation in Fabrication Process of Double-Ceramic-layers Thermal Barrier Coating System

A new preparing method and performances of FeAl/Al2O3 tritium permeation barrier

Application of Functionally Graded Interlayer on Reducing the Residual Stress Discontinuities at Interfaces Within a Plasma-Sprayed Thermal Barrier Coating

Finite element simulation of thermal stress in RF magnetron sputtered SiC coating as tritium penetration barrier

The Thermally Grown Oxide Thickness and Substrate Film Coefficient Effect on Residual Stresses within Thermal Barrier System

Residual thermal stress for the interface in zro2-nicral functionally gradient thermal barrier coatings

Effects of Ar/O2 Ratio on Preparation and Properties of Multilayer Cr2O3/α-Al2O3 Tritium Permeation Barrier

Effects of oxide thickness, Al2O3 interlayer and interface asperity on residual stresses in thermal barrier coatings

Preparation and Characterization of Al2O3/Y2O3 Multilayer Coatings As Tritium Permeation Barrier

Numerical Simulation and Experimental Verification on the Diffusion Behavior of Tritium in Zirconium Alloy Cladding Materials

Design, Optimization And Performance Testing Of Self-Healing Tritium Permeation Barriers

Influences of Interface Morphology and Thermally Grown Oxide Thickness on Residual Stress Distribution in Thermal Barrier Coating System

Interfacial interaction and roughness parameters effects on the residual stresses in DCL-TBC system with different thickness distributions

Effect of Interlayer on the Residual Stresses Within High-Temperature Coating

Effect of Diffusion Barriers on Steam Oxidation Properties and Interface Evolutions of Cr Coating for Zirconium Alloy at 1200 °C

Preparing Al 2 O 3 /TiO 2 nano-multilayers on the surface of FeAl/Al 2 O 3 coating as tritium permeation barrier

Optimization of the Thickness and Interface Structure of Al2O3-YAG/ZrO1.5-YO1.5-TaO1.5/8YSZ/NiCoCrAlY Multilayer Thermal Barrier Coatings: A Finite Element Simulation

Thermal stress reduction of bilayered systems by means of linearly graded interlayer

Effect of Material Properties on Residual Stress Distribution in Thermal Barrier Coatings