Experimental Study on the Preparation of Superalloy Inconel718 Heat Exchanger Channels by Electrochemical Etching Method

Lianjie Zhang,Jinghan Wang,Wei Li,Ping Yang,Ting Ma,Min Zeng,Qiuwang Wang

DOI: https://doi.org/10.1016/j.tsep.2024.102719

IF: 4.56

2024-01-01

Thermal Science and Engineering Progress

Abstract:The nuclear energy field requires the construction of heat exchangers that can withstand sufficiently high temperatures. In this paper, the etching technique was utilized to fabricate heat exchange channels on Inconel718 plates, and experiments were carried out in NaCl-ethylene glycol solution, three temperature conditions of 35 degrees C, 40 degrees C, and 45 degrees C, and two concentrations of electrolyte solutions, 0.5 mol/L and 1 mol/L, with the addition of 50 kHz ultrasound for comparison. The experimental results show that the etching rate can be as high as 2.894 mm/h, and the inter-electrode current is as high as 908 mA. The roughness characterization of the etching channel Ra and Rq measured by the aspheric surface measuring instrument can be as low as 2.416 mu m and 2.647 mu m, respectively. In the images generated by SEM scanning, it is found that uneven distribution of pits and bumps exist in the etching channel, but their diameters are all less than 0.1 mu m, which means the etched channel is acceptably smooth.