Abstract:In order to accurately characterize and evaluate dust particle diffusion in the dynamic tunneling process of a boring machine, this study considers the 31,116 main transport chute heaving face of the Lijiahao coal mine as a case study. A dynamic tunneling model is developed considering the real dynamic tunneling state of the header, to carry out an in-depth analysis of the spatial and temporal evolution of wind flow and dust dispersion in the tunnel under dynamic excavation. In addition, the results were compared against the calculations of a static standard excavation model of a conventional header. Employing CFD analysis accompanied by field measurements, it was highlighted that the dynamic tunneling of the header leads to an increase in the pressure difference and the turbulent kinetic energy at the working face. Moreover, an increase in the number of vortices was reported, and a higher concentration of dust spreads more quickly along the return wind side wall to the return flow area. On the other hand, the high concentration of dust under the standard tunneling model was found to accumulate a lot on the return wind side. Simultaneously, as the distance between the pressurized air outlet and the working face increases, the average wind speed in the vortex-type wind flow area at the front of the tunnel decreases. When t = 60 s, the return flow area expands to a space of 8 m~24 m from the head, and the dust accumulated above the header spreads to the back of the header to form a high concentration dust region of more than 500 mg/m3. It was shown that the range of high-concentration dust clouds in the breathing zone decreases compared to the results of the standard tunneling model. Moreover, the dust concentration in the breathing zone of the driver is significantly lower than that reported by the standard tunneling model. Based on the results of the field test, the average error between the simulated and measured data of the dynamic tunneling model was calculated to be around 6.46%, thus demonstrating the model's capability in describing the real working conditions of the heave tunnel.

Study on the Deposition Rates of Inhaled Dust in Respiratory Tract by Anchor Excavation Driver During Coal Mining

Temporal And Spatial Distribution Of Respirable Dust After Blasting Of Coal Roadway Driving Faces: A Case Study

Study on the Fine Particles Deposition Law in the Bronchus of Miners Affected by Dust Pollution in the Anchor Excavation Working Environment

Research on the Dust Diffusion and Pollution Behaviour of Dynamic Tunneling in Header Excavators Based on Dynamic Mesh Technology and Field Measurement

Characteristics of dust distributions and dust control measures around road-header drivers in mining excavation roadways

Dust concentration distribution and analysis of influencing factors in the heading face of Shangwan coal mine

Numerical study of gas-solid two-phase flow around road-header drivers in a fully mechanized excavation face

Numerical simulation and field test of dust control effect of exhaust ventilation in fully mechanized face

Diffuse Pollution Characteristics of Respirable Dust in Fully-Mechanized Mining Face under Various Velocities Based on CFD Investigation

Removal of Dust Produced in the Roadway of Coal Mine Using a Mining Dust Filtration System

Influence of environmental parameters on workers' dust inhalation in underground mines

Hazard and Pollution Characteristics of Rock-Containing Dust in Coal Mine Tunneling Faces Based on Experimental and Numerical Study

CFD Simulations of Air Curtain Dust Removal Effect by Ventilation Parameters During Tunneling

Analysis of a double-pressure double-extraction (DPDE) control dust removal system and optimal installation position of an air curtain generator

Research on Environmental Dust Pollution: Ventilation and Dust Space–time Evolution Law of a Fully Mechanized Mining Face with 7-M Mining Height

Study on the transport and deposition of micron-sized particles with different densities in the coal mine environment in miners

Development of a Respirable Dust Mitigation System for a High Longwall Face at Sihe Colliery in China Â a Case Study

Dust transport law and deposition characteristic in coal workers' respiratory tract based on CFD simulations

Analysis of Coal Mine Dust Concentration and Particle Size

Dust diffusion laws during partition excavation by boom-type roadheader in a metro tunnel

Experimental and numerical simulation study on forced ventilation and dust removal of coal mine heading surface