Abstract:Modal parameters are inherent characteristics of civil structures. Due to the effect of environmental factors and ambient loads, the physical and modal characteristics of a structure tend to change over time. Therefore, the effective identification of time-varying modal parameters has become an essential topic. In this study, an instantaneous modal identification method based on an adaptive chirp mode decomposition (ACMD) technique was proposed. The ACMD technique is highly adaptable and can accurately estimate the instantaneous frequencies of a structure. However, it is important to highlight that an initial frequency value must be selected beforehand in ACMD. If the initial frequency is set incorrectly, the resulting instantaneous frequencies may lack accuracy. To address the aforementioned problem, the Welch power spectrum was initially developed to extract a high-resolution time–frequency distribution from the measured signals. Subsequently, the time–frequency ridge was identified based on the maximum energy position in the time–frequency distribution plot, with the frequencies associated with the time–frequency ridge serving as the initial frequencies. Based on the initial frequencies, the measured signals with multiple degrees of freedom could be decomposed into individual time-varying components with a single degree of freedom. Following that, the instantaneous frequencies of each time-varying component could be calculated directly. Subsequently, a sliding window principal component analysis (PCA) method was introduced to derive instantaneous mode shapes. Finally, vibration data collected under various operational scenarios were used to validate the proposed method. The results demonstrated the effective identification of time-varying modal parameters in real-world civil structures, without missing modes.

Experimental Study of Mode Shapes Using the Residues of Measured Data

Wavelet-based Electromechanical Mode Shape Online Identification from Ambient Data

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

Energy-Based Stop Condition of Empirical Mode Decomposition of Vibration Signal

Study on Discrete Modeling Method of Modal Testing for Turbine Blade

A New Way to Define Closely Spaced Modes of Vibration

Experimental Study of Modal Parameter Identification in a Simulated Ambient-Excited Structure

Structural Damage Identification using Modal Data. II: Test Verification

Modal strain energy based structural damage localization for offshore platform using simulated and measured data

A Novel Method of Pure Output Modal Identification Based on Multivariate Variational Mode Decomposition

Output-only complete mode shape identification of bridges using a limited number of sensors

Structural Damage Identification using Modal Data. I: Simulation Verification

Modal parameter identification of tall buildings based on variational mode decomposition and energy separation

Improved Automatic Operational Modal Analysis Method and Application to Large-Scale Bridges

Misalignment Characteristic Analysis Based on Advanced Empirical Mode Decomposition

Modal Identification of Multi-Degree-of-freedom Structures Based on Intrinsic Chirp Component Decomposition Method

An Adaptive Chirp Mode Decomposition-Based Method for Modal Identification of Time-Varying Structures

Mode identification by eigensystem realization algorithm through virtual frequency response function

Flap-wise Vibrations of Non-Uniform Rotating Cantilever Beams: an Investigation with Operational Experiments

Mode Filtering of Continuous Scanning Laser Doppler Vibration Data

Experimental Analysis on Mode Localization of Damaged Reticulated Shell Structures