Abstract:Functionally graded shell (FGS) lattices have recently captivated enormous research interest in engineering applications for their outstanding mechanical and energy-absorbing performances. This paper designs FGS lattices featuring I-WP triply periodic minimal surfaces using implicit functions. FGS and uniform shell (US) samples made of Ti-6Al-4 V powder are manufactured utilizing laser powder bed fusion technology. Quasi-static compression and drop-weight impact experiments are conducted to evaluate the mechanical and energyabsorbing performances as well as deformation mechanism of FGS and US samples. The results demonstrate that the deformation modes of the samples under both loading conditions are similar, which is basically attributed to the drop-weight impact velocities being lower than the critical speeds calculated by the rigid-powerlaw hardening (RPLH) model. Additionally, the effects of loading velocity on the deformation mechanisms of US and FGS lattices are simulated, and homogenization, transition, and shock deformation models are predicted by the RPLH model. The FGS sample exhibits distinct layer-by-layer failures and eliminates the abrupt shear band under dynamic and quasi-static loadings. Compared to the quasi-static results, a notable strain rate hardening effect is observed under the dynamic condition, mainly due to the hardening of the row material. Consequently, the elastic modulus, yield strength, compression strength, and cumulative energy absorption of the US sample under drop-weight impact loading improved by 18.74 %, 56.52 %, 45.31 %, and 6.62 %, respectively. However, the FGS sample shows less sensitivity to strain rate owing to the layer-by-layer deformation mechanism, and their elastic modulus, yield strength, compression strength, and cumulative energy absorption only increased by 11.84 %, 34.72 %, 36.85 %, and 3.86 %, respectively. The FGS lattices exhibit a low peak stress during the compression process, which is favorable for industrial applications in crashworthiness and energy absorption.

Fatigue Properties of SiC Graded Ceramic Lattice Structures with a Triply Periodic Minimal Surface Manufactured by Laser Powder Bed Fusion

Mechanical characteristics of Si/SiC graded ceramic lattice structures with a triply periodic minimal surface fabricated by laser powder bed fusion

Si/SiC ceramic lattices with a triply periodic minimal surface structure prepared by laser powder bed fusion

Fatigue properties of Ti-6Al-4V Gyroid graded lattice structures fabricated by laser powder bed fusion with lateral loading

Performance optimization of Si/SiC ceramic triply periodic minimal surface structures via laser powder bed fusion

Study on the Fabrication and Mechanical Properties of SiC P /sic Gradient Lattice Structure Based on Selective Laser Sintering Technology

Enhanced Molding and Mechanical Properties of SiC-based Ceramic Lattice Structures Via Digital Light Processing

Residual Stresses and Mechanical Properties of Si 3 N 4 /sic Multilayered Composites with Different SiC Layers

Improving the Strength of the ZrC-SiC and TC4 Brazed Joint Through Fabricating Graded Double-Layered Composite Structure on TC4 Surface

Design, Fabrication and Properties of Layered SiC/TiC Ceramic with Graded Thermal Residual Stress

Mechanical responses of sheet-based gyroid-type triply periodic minimal surface lattice structures fabricated using selective laser melting

Quasi-Static compressive responses and fatigue behaviour of Ti-6Al-4 V graded lattice structures fabricated by laser powder bed fusion

Enhancing mechanical properties and damage tolerance of additive manufactured ceramic TPMS lattices by hybrid design

Quasi static and dynamic energy absorption characteristics of silicon carbide reinforced resin based on triply periodic minimal surface structures

Mechanical properties of three-dimensional functionally graded TPMS structures

Network-Based Radial-Gradient Al–Si10–Mg Gyroid Lattice Structures: Manufacture, Mechanical Response and Energy Absorption

Improved Mechanical Properties and Energy Absorption of BCC Lattice Structures with Triply Periodic Minimal Surfaces Fabricated by SLM

Effect of heat treatment on mechanical properties, failure modes and energy absorption characteristics of lattice skeleton and sheet structures fabricated by SLM

Evaluation of Quasi-Static and Dynamic Compressive Properties of Ti-6Al-4V Functionally Graded Shell Lattices with Minimal Surfaces

Fabrication and evaluation of SiC/Cu functionally graded material used for plasma facing components in a fusion reactor

Comparison of Compression Performance and Energy Absorption of Lattice Structures Fabricated by Selective Laser Melting