Abstract:This paper presents a bias modulation method for the force-to-rebalanced (FTR) micro hemispherical resonator gyroscope ($mu $ HRG) based on the mode-rotation, which is achieved by regulating the gyroscope’s drive and sense modes revolving at an assigned rate. The $mu $ HRG output under the mode-rotation includes the sinusoidally modulated bias and a rotation-induced DC bias. Accordingly, the alternating mode-rotation is proposed to chop the DC rate bias into square waves. By this approach, errors in the DC component from the scale factor drift are also modulated. The open-loop and closed-loop relationships between the rotation actuating force and the mode-rotation rate are investigated by theoretical analyses and numerical simulations. The lower and upper bounds of the rotation rate and the alternating frequency are discussed under the considerations of the error changing rate, the forcer capacity, the maximum voltage, the resonator momentum, and the measurement range. In addition, the controllers in the amplitude, quadrature, and inclination loops utilize the proportional-integral-resonance (PIR) regulating law to suppress the sinusoidal-varying errors introduced by the assigned rotation. The proposed bias modulation method was experimentally verified by a $mu $ HRG with an FPGA platform. The results suggest the alternating mode-rotation improved the bias temperature coefficient by 12 times over the rotation-free FTR architecture. For a three-hour measurement at room temperature, the rate-integration of the mode alternately rotated FTR was within 50 degrees. In comparison, the rate-integration of the rotation-free FTR diverged over 600 degrees due to the bias drift. The presented bias modulation method can be utilized in axisymmetric gyroscopes, such as hemispherical, ring/disk, quad-mass gyroscopes, etc.

Modeling, Characterization, and Compensation of Detection and Actuation Coupling Errors for Whole-Angle Micro Hemispherical Resonant Gyroscope

Angle error from vibrating in tri-axial interferometric fiber optic gyroscopes and the evaluation with dual-laser Doppler vibrometers

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

In-Run Automatic Mode-Matching of Whole-Angle Micro-Hemispherical Resonator Gyroscope Based on Standing Wave Self-Precession

Error Modeling and Compensation of Circular Motion on a New Circumferential Drilling System

A MICROMECHANICAL MODE-MATCHED GYROSCOPE USING STIFFNESS NONLINEARITY AND ELECTROSTATIC TUNING

4.11-Million Q-factor Whole-Angle MEMS Hemispherical Resonator Gyroscope with 0.013°/h Bias Instability

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

Boundary conditions and the Wigner equation solution

High sensitivity rate-integrating hemispherical resonator gyroscope with dead area compensation for damping asymmetry

Bias Modulation of Force-to-Rebalanced Micro Hemispherical Resonator Gyroscope Based on Mode-Rotation

Perineuronal glial nets in the rat spinal cord. A Golgi study.

Offset Errors Caused By The Resonance Asymmetry In The Waveguide-Type Optical Passive Resonator Gyro

Online asymmetry estimation for whole angle mode coriolis vibratory gyroscopes by high frequency injection

Separation and identification for structure error parameter in vibratory silicon MEMS gyroscopes

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

A Rate Hemispherical Resonator Gyroscope with Bias Stability of 0.0056°/h with Compensation of Phase Delay

Habitual Physical Activity and Glucose Tolerance: Males Age 16–64 in a Total Community

Resonance asymmetry induced bias errors in waveguide type optical passive resonator gyro.

An In-Run Automatic Mode-Matching Method With Amplitude Correction and Phase Compensation for MEMS Disk Resonator Gyroscope

Analysis of the Mechanical Coupling Characteristics of a Monolithic Tri-Axis MEMS Gyroscope