Abstract:Resonator micro optic gyro (RMOG) is a promising candidate for applications requiring small, light and robust gyros. In optical passive ring resonator gyros, clockwise and counter clockwise lightwaves are modulated at different frequencies to reduce the backscattering induced noise. The effectiveness of this technique, however, is determined by the carrier suppression level. Accurate modulation index and high environmental temperature stability is required for achieving high total carrier suppression for the traditional single phase modulation technique (SPMT). In this paper, we propose an RMOG based on the double phase modulation technique (DPMT). Compared with the traditional SPMT, two additional phase modulations are added to provide additional carrier suppression. It is found that the control accuracy of the modulation index and temperature stability is relaxed more than 30 times. It is easily performed for reducing the backscattering error below the shot noise limited sensitivity. The modulation parameters in the DPMT are analyzed and optimized. Based on the optimum parameters of the DPMT, a bias stability of 1.85 x 10(-4) rad/s is successfully demonstrated in the polarization maintaining silica waveguide resonator with the length of 7.9 cm. This is the best result reported to date, to the best of our knowledge, for a waveguide type passive ring resonator gyro. (C) 2011 Optical Society of America

Resonance asymmetry induced bias errors in waveguide type optical passive resonator gyro.

Resonance Asymmetry Phenomenon in Waveguide-Type Optical Ring Resonator Gyro

Offset Errors Caused By The Resonance Asymmetry In The Waveguide-Type Optical Passive Resonator Gyro

Performance Analysis of an Optical Passive Ring-Resonator Gyro with A Hollow-Core Photonic Bandgap Fiber Sensing Coil

Analysis of Kerr Effect in Resonator Fiber Optic Gyros with Triangular Wave Phase Modulation.

Polarization error in resonant micro-optic gyroscopewith different waveguide-type ring resonatorstructures

Nonreciprocal Phase Error Caused by Orthogonal Magnetic Field in a Polarization-Maintaining Fiber-Optic Gyro

Test and Analysis of the Optical Kerr-Effect in Resonant Micro-Optic Gyros

Improving Long-Term Stability of a Resonant Micro-Optic Gyro by Reducing Polarization Fluctuation

Eliminating bias drift error in lock-in frequency for a resonant fiber optic gyro.

Evaluation of Polarization Characteristics of the Fiber-Pigtailed Waveguide-Type Ring Resonator and Implications for Resonant Micro-Optic Gyroscopes

Resonator micro-optic gyroscope based on the double phase modulation technique

Reduction of optical Kerr-effect induced error in a resonant micro-optic gyro by light-intensity feedback technique.

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

Residual amplitude modulation induced error in resonant micro-optic gyroscope

Influence of the Modulation Phase Error on Bias Error in Interferometric Fiber Optic Gyroscope

Polarization maintaining silica waveguide resonator optic gyro using double phase modulation technique.

Waveguide-type Optical Passive Ring Resonator Gyro Using Phase Modulation Spectroscopy Technique

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Double Closed-Loop Resonant Micro Optic Gyro Using Hybrid Digital Phase Modulation.