Abstract:Micro and Nano-technologies need precision machines that can produce motion accuracy down to micro/nano-meter range. At the same time, these machines have to operate at high speeds to yield high productivity. Such an increasingly tight control performance requirement puts a significant challenge to control community and forces control engineers to look beyond traditional linear control theory for more advanced nonlinear controllers. This research is to present an advanced nonlinear adaptive robust control approach to achieve micro/nanometer level positioning accuracy for micro/nano-manipulation type applications. In addition, the proposed control strategy is implemented on a commercial linear motor drive system with a position measurement resolution of 20 nanometers by an external laser interferometer. Experimental results for both long-range high-speed/high-acceleration motions and short-range slow motions are presented to demonstrate the precision motion that can be achieved by the proposed method and various practical issues that remain to be solved. It is found that for motions with a maximum speed of 2 m/sec and maximum acceleration of 45 m/sec2, the steady state position tracking error is within the linear encoder resolution of 0.5 μm when the system comes to a stop and within 5 μm during the 2 m/sec constant speed period. Furthermore, the maximal position tracking during the entire motion is mostly within 20μm. For slow motions with a maximal speed of only 0.0002m/sec, the steady state position tracking error with the external laser interferometer position measurement is mostly within 0.1 μm when the system comes to a stop and within 0.2 μm during the constant low speed period, and the maximal position tracking during the entire motion is within 2μm.

Design and tracking control of a large-range reluctance-actuated compliant nano-manipulator

Design and Control of a Piezoelectric Ceramic-actuated and Flexure Hinge-based Micromanipulator

Variable Force Tracking Control Via Online Learning

A Large-Stroke Reluctance-Actuated Nanopositioner: Compliant Compensator for Enhanced Linearity and Precision Motion Control

Tracking Control of a Large Range 3D Printed Compliant Nano-Manipulator with Enhanced Anti-Windup Compensation

A Large Range Compliant XY Nano-Manipulator with Active Parasitic Rotation Rejection

Robust Tracking Control of an XY Compliant Nanomanipulator with Variable Loads.

Large Range Tracking of an XY Compliant Nanomanipulator with Nonlinear Stiffness

Tracking Control of a Compliant XY Nano-Positioner under Plant Uncertainty Using a Transfigured Loop-Shaping H∞ Controller

Design and Trajectory Tracking Control of a Piezoelectric Nano-Manipulator with Actuator Saturations

Design, Assessment, and Trajectory Control of a Novel Decoupled Robotic Nanomanipulator

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

An Optimized Design of a Large Stroke Beam Flexure-Based Parallel Nano Manipulator

Dynamic Modeling and Controller Design of a Planar Parallel 3-RRR Compliant Micromanipulator

Design and Control of a Multi-Dof Micromanipulator Dedicated to Multiscale Micromanipulation

Large dynamic range tracking of an XY compliant nanomanipulator with cross-axis coupling reduction

Precision Motion Control of Linear Motor Drive Systems for Micro/Nano-Positioning

On The Design Of Compliant-Based Micro-Motion Manipulators With A Nanometer Range Resolution

Large Stroke Tracking of a Nanomanipulator with Anticipatory Anti-windup Compensation of Time-varying Internal Principle-based Control

Development of a Large-Range XY-Compliant Micropositioning Stage with Laser-Based Sensing and Active Disturbance Rejection Control