Abstract:This article presents a novel high-gain loop-shaping (HGLS) method for precision motion devices by introducing high gains into the control loop. The high gains can be generated via the inclusion of a low pass filter in a feedback manner, which could significantly improve the tracking accuracy for general trajectories with a simple structure. This control law also endows the superiority of robustness against model variations and external disturbances. To evaluate the performance of the proposed HGLS method, tracking and disturbance rejection experiments are conducted on a custom-designed piezo-actuated nanopositioner. The experimental results demonstrate the advancement of HGLS in terms of precision motion control, where the root-mean-squared error is reduced from 7.8 nm to 1.8 nm as compared with the high-gain proportional-integral controller with the same phase margin when tracking a random Non-Uniform Rational B-splines curve with large external disturbances. With its remarkable advantages of high tracking accuracy and simple structure, this method offers a practical solution for industrial automation applications for enhancing the control performance. Note to Practitioners —Advanced control methods are of great importance in meeting the tremendous requirements of automation in mechanical and electronic systems. Nonetheless, it is still challenging for a controller to simultaneously realize high control accuracy and strong robustness for general trajectories while retaining a simple structure. In this paper, a novel HGLS method is proposed. For this method, high control accuracy and strong robustness can be achieved by introducing high gains into the control loop, which can be generated by the inclusion of a simple low pass inside the closed-loop plant. A trade-off between the control gain and stability margin can be balanced only by tuning the parameters of the employed low-pass filter, and thus the implementation of the HGLS is rather simple. This method has no constraints on the form or order of the plant models and holds robustness against model variations. As compared with the high-gain proportionalintegral controller with the same phase margin, the control gain of the HGLS is much higher within the effective control bandwidth. Therefore, outstanding control performance can be achieved for general trajectories within this bandwidth. Due to the strong universality and simple structure of the HGLS, it is promising to be implemented in various industrial automation equipment, such as machine tools, multi-axis systems, robotics, scanners, etc.

Tracking Control of a Compliant XY Nano-Positioner under Plant Uncertainty Using a Transfigured Loop-Shaping H∞ Controller

Trajectory Tracking Control of a 6-DOF Hydraulic Parallel Robot Manipulator with Uncertain Load Disturbances

Design and Control of a Piezoelectric Ceramic-actuated and Flexure Hinge-based Micromanipulator

Robust Tracking Control of an XY Compliant Nanomanipulator with Variable Loads.

Design and tracking control of a large-range reluctance-actuated compliant nano-manipulator

Integrated Development of a Topology-Optimized Compliant Mechanism for Precise Positioning

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

Tracking Control of a Piezo Actuated System using Fuzzy Sliding-Mode Control with Feedforward Compensation

Fractional Order Zero Phase Error Tracking Control Of A Novel Decoupled 2-Dof Compliant Micro-Positioning Stage

High-bandwidth tracking control of piezo-actuated nanopositioning stages using closed-loop input shaper

A Trajectory Tracking Control Based on a Terminal Sliding Mode for a Compliant Robot with Nonlinear Stiffness Joints

Tracking Control of a Large Range 3D Printed Compliant Nano-Manipulator with Enhanced Anti-Windup Compensation

Robust High-Bandwidth Control of Nano-Positioning Stages with Kalman Filter Based Extended State Observer and H∞ Control

Design, Assessment, and Trajectory Control of a Novel Decoupled Robotic Nanomanipulator

Model-Free Adaptive Nonlinearity and Hysteresis Compensation Control Strategy with Application to Nano-Precision Piezoelectric Stage

Intelligent Tracking Error Prediction and Feedforward Compensation for Nanopositioning Stages with High-bandwidth Control

A High-Gain Loop-Shaping Method for Precision Motion Control

Practical Prescribed Tracking Control of n-DOF Robotic Manipulator with Uncertainties via Friction Compensation Approach

A practical PID variable stiffness control and its enhancement for compliant force-tracking interactions with unknown environments

Positive Position Feedback Based High-Speed Tracking Control Of Piezo-Actuated Nanopositioning Stages

Robust Adaptive Backstepping Control for Piezoelectric Nano-Manipulating Systems