Abstract:Compliance control is required in the applications of robots for assembling, grinding, polishing and human-robot interface, which needs both position control and force control of robots. The impedance control based on joint torque servo is a promising and practical method to realize compliance control in industrial applications. The performance of a joint torque servo controller is thus crucial to the success of compliance control. However, both nonlinear friction torque of the joint motor and varied dynamics of environmental contact during manipulation increase control difficulty greatly. This paper focuses on the compliance control problem and presents a new joint torque servo controller which is a cascading structure including an inner velocity feedback loop and an outer torque control loop. Due to the high signal-to-noise ratio of the motor velocity, an extended state observer is designed to effectively estimate and compensate for the motor friction torque, varied dynamics of environmental contact and other unknown disturbance. And benefiting from the introduction of the efficient and powerful velocity inner loop, the new torque controller performs very well not only in the rigid but also elastic contact environment. Then a standard PD controller is designed in the outer torque loop to produce the control law. Based on the satisfactory joint torque controller, a simplified impedance control algorithm is designed to achieve the force control. Experiments with three other joint torque controllers on a robot manipulator are conducted to demonstrate the proposed joint torque method and the overall force control framework. These results show the proposed joint torque controller can reduce the steady-state error from 3.07 Nm to 0.21 Nm which indicates the joint actuator friction can be eliminated by more than 99%. And a substantial improvement can also be observed in the experiments of force control based on the new joint torque controller.

A practical PID variable stiffness control and its enhancement for compliant force-tracking interactions with unknown environments

Variable Force Tracking Control Via Online Learning

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Efficient PID Tracking Control of Robotic Manipulators Driven by Compliant Actuators

A Composite Adaptive Robust Control for Pneumatic Servo Systems with Time-Varying Inertia

Compliance Control for Robot Manipulation in Contact with a Varied Environment Based on a New Joint Torque Controller

Adaptive Robust Motion and Force Tracking Control of Robot Manipulators in Contact With Compliant Surfaces With Unknown Stiffness

Smooth adaptive hybrid impedance control for robotic contact force tracking in dynamic environments

Variable Stiffness Force Tracking Impedance Control Using Differential-less Method

Neural network-based variable stiffness impedance control for internal/external forces tracking of dual-arm manipulators under uncertainties

Adaptive variable impedance control for dynamic contact force tracking in uncertain environment

A Trajectory Tracking Control Based on a Terminal Sliding Mode for a Compliant Robot with Nonlinear Stiffness Joints

Constrained neural adaptive PID control for robot manipulators

Adaptive fractional-order admittance control for force tracking in highly dynamic unknown environments

Dynamic Modeling and Robust Force-Position Control of a Variable Stiffness Gripper

Adaptive Impedance Control for Compliantly Actuated Robots with a Unified Safety Measure

An Adaptive Grasping Force Tracking Strategy for Nonlinear and Time-Varying Object Behaviors

Robust Adaptive PID Control of Robot Manipulator with Bounded Disturbances

Force Tracking Impedance Control of Robot Manipulators Under Unknown Environment

Adaptive PID control of robotic manipulators without equality/inequality constraints on control gains