Abstract:This work proposes a liquid-metal-based calorimetric micro-flow sensor within a polydimethylsiloxane (PDMS) chip. It can measure the flow rate of fluid in microscale channels, with a range as low as several microliters per minute. This in-chip sensor is proposed to solve the issue of detecting the flow rate in microfluidic systems. To make the sensor compatible with PDMS microfluidic chips, low-melting-point gallium-based alloy and bismuth-based (bi-based) alloy are used to make the micro heater and bi-metal thermocouples, for these alloys can be easily injected into a PDMS chip to form electrodes. To minimize heat resistance (or temperature difference) between fluid and the detecting ends of thermocouples, these ends are directly exposed to liquid in the flow channel with the help of a special reversible bonding technology. Thermocouples are connected in parallel to improve the sensor's response. A novel method to bond and electrically connect the sensor to a PCB (print circuit board) is also elaborated. Since the calorimetric flow sensor is sensitive to heating power, fluid temperature and environment cooling, a dimensionless parameter less independent of these factors is deduced from heat transfer theory, and this idea is used in result processing to offset the bad effect. Experiments with pure water show that this sensor can be used to detect flow rates, with a resolution up to 4 μl/min/mV and a range of 12 μl/min in this case, and that at different heating powers, the thermal potential results vary significantly whereas the dimensionless results nearly keep the same. Present work indicates that this sensor has the potential to be integrated into a PDMS microfluidic system and to provide accurate and stable results if a dimensionless method is used in data processing.

A Transparent Flow Velocity Sensor of Ultra-thin Glass Fabricated by Femtosecond Laser Processing

Measuring Flow Velocity Distribution in Microchannels Using Molecular Tracers

Ultrafast Measurement of Transient Electroosmotic Flow in Microfluidics

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

Bio-inspired flow rate sensor based on optical microfiber embedded soft film

Flow Sensor with High Sensitivity Fabricated by Femtosecond Laser

Design of Thermal Liquid Flow Microsensor

Integrated membrane-free thermal flow sensor for silicon-on-glass microfluidics

Fabrication and characterization of high-sensitivity, wide-range, and flexible MEMS thermal flow velocity sensors

Three-Dimensional Opto-Fluidic Devices Fabricated by Ultrashort Laser Pulses for High Throughput Single Cell Detection and Processing

An All-Glass Microfluidic Flow Cytometer

Microfluidic-integrated graphene optical sensors for real-time and ultra-low flow velocity detection

Flow sensor based on the snap-through detection of a curved micromechanical beam

Laser Direct Writing of Flexible Thermal Flow Sensors

Liquid Flow Meter by Fiber-Optic Sensing of Heat Propagation

Integrated High-Speed Flow Sensor Based on Pressure Difference Measuring

Multiscale Integrated Temperature/Flow Velocity Sensor Patches for Microfluidic Applications

A liquid-metal-based microscale calorimetric in-chip flow sensor for flow rate measuring

Microfluidic Flowmeter Based on Micro "Hot-Wire" Sandwiched Fabry-Perot Interferometer.

Anisotropic microfluidics and flow monitoring with a microchannel towards soft-matter sensing

High-Sensitivity Flow Velocity Sensor Based on Fiber Grating