Abstract:An all-fiber strain sensor based on the few-mode fiber (FMF) hybrid construction is proposed and experimentally demonstrated to solve the problem of cross-sensitivity between strain and temperature. The proposed sensor is constructed by three pieces of FMFs that are the dislocation fusion structure. The strain sensitivity of the sensor is analyzed by the wavelength shift and light intensity. According to the wavelength shift analysis, experimental results show that the strain sensitivity of the proposed sensor is-3.13 pm/p epsilon and-2.85 pm/p epsilon at the wave-length of resonance peaks dipA and dipB in the strain range from 0 to 700 p epsilon. Meanwhile, the wavelengths of resonance peaks dipA and dipB show few wavelengths shift in the temperature range of 20-60 C, which pro-vides the possibility for the proposed sensor in strain sensing applications without cross-sensitivity under a temperature range of 20-60 C. According to the light intensity analysis, we find that there is a linear relationship between the amplitude of the spatial frequency spectrum and strain variation, and the amplitude decreases with the increase of strain at 0.026 nm(-1) and 0.045 nm(-1). The strain sensitivity is-0.0003 a.u./p epsilon at 0.026 nm(-1) and-0.0004 a.u./p epsilon at 0.045 nm(-1), and there is no spatial frequency shift as the strain increases. Very importantly, the duplicate sensor keeps the same strain and temperature characteristics that suggests excellent fabrication repeatability of the proposed sensor. From the aspects of practicality and performance, the proposed strain sensor is not only easy to construct but also temperature insensitive. These advantages make the proposed strain sensor very promising in practical sensing applications under different temperatures.

All-Fiber Fabry-Perot Micro-cavity Temperature-Insensitive Sensor for Strain Sensing Based on T-shaped Structure

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Temperature and Strain Fiber Sensor Design Based on Microstructural Fabry-Perot Cavity

Miniaturized fiber Fabry–Pérot interferometer for strain sensing

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Temperature-insensitive strain sensor based on in-line Fabry-Perot interferometer

Temperature-Independent Ultrasensitive Fabry–Perot All-Fiber Strain Sensor Based on a Bubble-Expanded Microcavity

Simultaneous Measurement of Temperature and Strain Based on All-Fiber Fabry-Perot Sensor

High-sensitivity Strain Sensor Based on In-Fiber Improved Fabry-Perot Interferometer.

Temperature-insensitive fiber optic Fabry-Perot interferometer based on special air cavity for transverse load and strain measurements.

Strain-Insensitive Temperature Sensor Based on Few-Mode Fiber and Photonic Crystal Fiber

A Fabry–Perot Interferometer Strain Sensor Based on Concave-Core Photonic Crystal Fiber

Ultra-High Sensitivity and Temperature-Insensitive Optical Fiber Strain Sensor Based on Dual Air Cavities

A Fabry–Perot Interferometer with Asymmetrical Tapered-Fiber for Improving Strain Sensitivity

High Sensitivity, Low Temperature-Crosstalk Strain Sensor Based on a Microsphere Embedded Fabry–Perot Interferometer

A Spiral-Polished Fiber Sensor for Strain and Temperature Measurement

High-sensitivity Strain Sensor with an In-Fiber Air-Bubble Fabry-Perot Interferometer

Tapered Hollow‐Core Fiber Air‐Microbubble Fabry–Perot Interferometer for High Sensitivity Strain Measurement

Temperature-Insensitive Strain Sensor Based on Few-Mode Fiber

Temperature-insensitive Optical Fiber Strain Sensor Fabricated by Two Parallel Connection Fabry-Perot Interferometers with Air-Bubbles

Cascaded-cavity Fabry–Perot Interferometer for Simultaneous Measurement of Temperature and Strain with Cross-Sensitivity Compensation