Abstract:A high-sensitivity fiber-optic strain sensor, based on the Vernier effect and separated Fabry–Perot interferometers (FPIs), is proposed and experimentally demonstrated. One air-cavity FPI is used as a sensing FPI (SFPI) and another is used as a matched FPI (MFPI) to generate the Vernier effect. The two FPIs are connected by a fiber link but separated by a long section of single-mode fiber (SMF). The SFPI is fabricated by splicing a section of microfiber between two SMFs with a large lateral offset, and the MFPI is formed by a section of hollow-core fiber sandwiched between two SMFs. By using the Vernier effect, the strain sensitivity of the proposed sensor reaches <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{1.15 nm/}\mu \varepsilon $</tex-math></inline-formula> , which is the highest strain sensitivity of an FPI-based sensor reported so far. Owing to the separated structure of the proposed sensor, the MFPI can be isolated from the SFPI and the detection environment. Therefore, the MFPI is not affected by external physical quantities (such as strain and temperature) and thus has a very low temperature cross-sensitivity. The experimental results show that a low-temperature cross-sensitivity of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{0.056 } \mu \varepsilon /^ {\circ }{\text{C}}$</tex-math></inline-formula> can be obtained with the proposed sensor. With its advantages of simple fabrication, high strain sensitivity, and low-temperature cross-sensitivity, the proposed sensor has great application prospects in several fields.

High-sensitivity Strain Sensor Based on In-Fiber Improved Fabry-Perot Interferometer.

High Sensitivity Fabry-Perot Interferometer Based on Offset Splicing Fibers and Vernier Effect for Strain Measurement

Temperature-insensitive strain sensor based on in-line Fabry-Perot interferometer

High-sensitivity Strain Sensor with an In-Fiber Air-Bubble Fabry-Perot Interferometer

High-Sensitivity Fiber Fabry-Pérot Interferometer Strain Sensor

High-sensitivity fiber-optic strain sensor based on the Vernier effect and separated Fabry—Perot interferometers

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Highly Sensitive Strain Sensor Based on the Vernier Effect With High Extinction Ratio and Low-Temperature Cross-Sensitivity by Compact Double FPI

A Fabry–Perot Interferometer with Asymmetrical Tapered-Fiber for Improving Strain Sensitivity

Temperature-insensitive fiber optic Fabry-Perot interferometer based on special air cavity for transverse load and strain measurements.

High Sensitivity, Low Temperature-Crosstalk Strain Sensor Based on a Microsphere Embedded Fabry–Perot Interferometer

Ultra-high Sensitivity Strain Sensor Based on Biconical Fiber with a Bulge Air-Bubble

High-sensitivity Strain Sensor Based on In-Fiber Rectangular Air Bubble.

A Fabry–Pérot Interferometer Strain Sensor Composed of a Rounded Rectangular Air Cavity with a Thin Wall for High Sensitivity and Interference Contrast

A Fabry–Perot Interferometer Strain Sensor Based on Concave-Core Photonic Crystal Fiber

Ultrasensitive Fabry–Perot Strain Sensor Based on Vernier Effect and Tapered FBG-in-Hollow Silica Tube

Tapered Hollow‐Core Fiber Air‐Microbubble Fabry–Perot Interferometer for High Sensitivity Strain Measurement

High-Sensitivity Fabry–Pérot Strain Senor Based on Fusion Splicing Photonic Crystal Fiber and Single Mode Fiber

Low temperature crosstalk optical fiber Fabry-Perot interferometers for highly sensitivity strain measurement based on parallel Vernier effect

Ultrasensitive Temperature and Strain Sensor Based on a Hybrid Fiber Interferometer With the Vernier Effect

All-Fiber Fabry-Perot Micro-cavity Temperature-Insensitive Sensor for Strain Sensing Based on T-shaped Structure