Abstract:Ti–Mo–Zr alloys have attracted increasing interest for biomedical applications, due to their outstanding properties such as low elastic modulus. To improve the bioactivity of alloys, this study utilized the anodic oxidation method to fabricate porous micro/nano structures on the surface of a series of Ti–Mo–Zr alloys, including the Ti–12Mo-AO, Ti–10Zr-AO, and Ti–12Mo–10Zr-AO groups. The morphology, composition, phase, microhardness, roughness, wettability, adhesion strength, corrosion resistance, bioactivity, and biocompatibility of each group were systematically investigated. The formation mechanism of surfaces was discussed from the perspective of thermodynamics. Our results demonstrated that, Ti–12Mo-AO showed the structure of single-layer regularly arranged nanotubes, while Ti–10Zr-AO and Ti–12Mo–10Zr-AO exhibited a double-layer porous structure with a nano-filamentous upper layer and a densely arranged nanotube lower layer. With low crystallinity, these surfaces showed an amorphous structure and were composed of the oxides of corresponding matrix element. After anodizing, the microhardness and wettability of surfaces increased, while their corrosion resistance decreased. Compared with Ti–12Mo-AO, Ti–10Zr-AO and Ti–12Mo–10Zr-AO possessed a higher degree of roughness, better wettability, stronger interface bonding, and higher apatite forming ability. Furthermore, the biocompatibility of Ti–12Mo–10Zr-AO was superior to that of the other groups. Taken together, our results revealed that, under the same anodic oxidation condition, Ti–Mo–Zr alloys formed different porous micro/nano structures on the surface. Particularly, due to its favorable properties, Ti–12Mo–10Zr-AO is very attractive for future biomedical application.

A New Study on Formation Mechanism of Ordered Porous Anodized Metal Oxides

Effect of Crystal Structure of Anodic Metal on Morphology of Porous Metal Oxides Prepared by Anodic Oxidation

Mechanochemical Nonhydrolytic Sol–Gel-Strategy for the Production of Mesoporous Multimetallic Oxides

The Formation Process and Mechanism of Inclined Porous in Porous Anodic Anomina

Preparation and Study of Ordered Porous Anodic Alumina Film

Formation of Nanoporous Mixed Aluminum-Iron Oxides by Self-Organized Anodizing of FeAl3 Intermetallic Alloy

Preparation and Influence Factors of Porous Aluminum Anodizing Film

A Highly Controllable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membranes

The Microstructure, Morphology, and Mechanical Properties of Sol-Gel-derived Amorphous Aluminum Oxide Films

Porous nanostructured metal oxides synthesized through atomic layer deposition on a carbonaceous template followed by calcination

Formation of Anodic Aluminum Oxide with Serrated Nanochannels.

A Controllable and Widely Applicable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membrane

Influence of Mass and Heat Transfer onMorphologies of Metal Oxide Nanochannel Arrays Prepared

Influence of Mass and Heat Transfer on Morphologies of Metal Oxide Nanochannel Arrays Prepared by Anodization Method

Formation mechanism and photoelectric properties of Al2O3 film based on atomic layer deposition

Ordering and Modification of Nanopores in Porous Anodic Aluminum Membranes

Fabrication of Nanostructure by Porous Anodic Alumina

Fabrication of micro/nanoporous templates with a novel hierarchical structure by anodization of a patterned aluminum surface

Construction of porous micro/nano structures on the surface of Ti–Mo–Zr alloys by anodic oxidation for biomedical application

Study on the influence on the formation of highly ordered porous anodic aluminia membrane

Preparation of Ordered Nanohole Arrays by Two-Step Anodization of Austenitic Stainless Steel Substrates