Abstract:Ti–Mo–Zr alloys have attracted increasing interest for biomedical applications, due to their outstanding properties such as low elastic modulus. To improve the bioactivity of alloys, this study utilized the anodic oxidation method to fabricate porous micro/nano structures on the surface of a series of Ti–Mo–Zr alloys, including the Ti–12Mo-AO, Ti–10Zr-AO, and Ti–12Mo–10Zr-AO groups. The morphology, composition, phase, microhardness, roughness, wettability, adhesion strength, corrosion resistance, bioactivity, and biocompatibility of each group were systematically investigated. The formation mechanism of surfaces was discussed from the perspective of thermodynamics. Our results demonstrated that, Ti–12Mo-AO showed the structure of single-layer regularly arranged nanotubes, while Ti–10Zr-AO and Ti–12Mo–10Zr-AO exhibited a double-layer porous structure with a nano-filamentous upper layer and a densely arranged nanotube lower layer. With low crystallinity, these surfaces showed an amorphous structure and were composed of the oxides of corresponding matrix element. After anodizing, the microhardness and wettability of surfaces increased, while their corrosion resistance decreased. Compared with Ti–12Mo-AO, Ti–10Zr-AO and Ti–12Mo–10Zr-AO possessed a higher degree of roughness, better wettability, stronger interface bonding, and higher apatite forming ability. Furthermore, the biocompatibility of Ti–12Mo–10Zr-AO was superior to that of the other groups. Taken together, our results revealed that, under the same anodic oxidation condition, Ti–Mo–Zr alloys formed different porous micro/nano structures on the surface. Particularly, due to its favorable properties, Ti–12Mo–10Zr-AO is very attractive for future biomedical application.

Effect of Crystal Structure of Anodic Metal on Morphology of Porous Metal Oxides Prepared by Anodic Oxidation

A New Study on Formation Mechanism of Ordered Porous Anodized Metal Oxides

A unified thermodynamic theory for the formation of anodized metal oxide structures

Nanostructure Transition on Anodic Titanium: Structure Control Via a Competition Strategy Between Electrochemical Oxidation and Chemical Etching

Fabrication of micro/nanoporous templates with a novel hierarchical structure by anodization of a patterned aluminum surface

Porous nanostructured metal oxides synthesized through atomic layer deposition on a carbonaceous template followed by calcination

A Highly Controllable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membranes

Morphology on 3D ordered macroporous metals associated to deposition depth

A Controllable and Widely Applicable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membrane

Fabrication and characterization of anodic films onto the FeCrAl stainless steel in ethylene glycol electrolyte

Studies of Oxide Growth Location on Anodization of Al and Ti Provide Evidence Against the Field-Assisted Dissolution and Field-Assisted Ejection Theories

Construction of porous micro/nano structures on the surface of Ti–Mo–Zr alloys by anodic oxidation for biomedical application

Influence of Mass and Heat Transfer onMorphologies of Metal Oxide Nanochannel Arrays Prepared

Influence of Mass and Heat Transfer on Morphologies of Metal Oxide Nanochannel Arrays Prepared by Anodization Method

Effect of Structure of Aluminum Film by Magnetron Sputtering on Micro-Pores Formed on 316L Stainless Steel by Anodizing

The Formation Process and Mechanism of Inclined Porous in Porous Anodic Anomina

Study on Porous Structure Films with Characteristics of Three-Dimensional Connectivity and Nanometric on Medically Titanium

Anodized Porous Oxide Thin Films for Energy Application

Morphological Control Of Alpha-Feooh Nanostructures By Electrodeposition

Study on the influence on the formation of highly ordered porous anodic aluminia membrane

Fabrication of Crystallized Porous Anodic Aluminum Oxide under Ultra-High Anodization Voltage