Abstract:BACKGROUND CONTEXT : With the aging population, osteoporosis, which leads to poor fusion, has become a common challenge for lumbar surgery. In addition, most people with osteoporosis are elderly individuals with poor surgical tolerance, and poor bone quality can also weaken the stability of internal fixation. PURPOSE : This study compared the fixation strength of the bilateral traditional trajectory screw structure (TT-TT), the bilateral cortical bone trajectory screw structure (CBT-CBT), and the hybrid CBT-TT (CBT screws at the cranial level and TT screws at the caudal level) structure under different bone mineral density conditions. STUDY DESIGN : A finite element (FE) analysis study. METHODS Above all, we established a healthy adult lumbar spine model. Second, under normal and osteoporotic conditions, three transforaminal lumbar interbody fusion (TLIF) models were established: bilateral traditional trajectory (TT-TT) screw fixation, bilateral cortical bone trajectory (CBT-CBT) screw fixation, and hybrid cortical bone trajectory screw and traditional trajectory screw (CBT-TT) fixation. Finally, a 500-N compression load with a torque of 10 N/m was applied to simulate flexion, extension, lateral bending, and axial rotation. We compared the range of motion (ROM), adjacent disc stress, cage stress, and posterior fixation stress of the different fusion models. RESULTS : Under different bone mineral density conditions, the range of motion of the fusion segment was significantly reduced. Compared to normal bone conditions, the ROM of the L4-L5 segment, the stress of the adjacent intervertebral disc, the surface stress of the cage, and the maximum stress of the posterior fixation system were all increased in osteoporosis. Under most loads, the ROM and surface stress of the cage and the maximum stress of the posterior fixation system of the TT-TT structure are the lowest under normal bone mineral density conditions. However, under osteoporotic conditions, the fixation strength of the CBT-CBT and CBT-TT structures are higher than that of the TT-TT structures under certain load conditions. At the same time, the surface stress of the intervertebral fusion cage and the maximum stress of the posterior fixation system for the two structures are lower than those of the TT-TT structure. CONCLUSION : Under normal bone mineral density conditions, transforaminal lumbar interbody fusion combined with TT-TT fixation provides the best biomechanictability. However, under osteoporotic conditions, CBT-CBT and CBT-TT structures have higher fixed strength compared to TT-TT structures. The hybrid CBT-TT structure exhibits advantages in minimal trauma and fixation strength. Therefore, this seems to be an alternative fixation method for patients with osteoporosis and degenerative spinal diseases. CLINICAL SIGNIFICANCE This study provides biomechanical support for the clinical application of hybrid CBT-TT structure for osteoporotic patients undergoing TLIF surgery.

The Anti-Loosening Characteristics of Cortical Bone Trajectory Screws and Conventional Pedicle Screws under Different Bone Quality Conditions: a Comparative Study

Computed Tomography Comparison Study of Two Axis-based C1 Transpedicular Screw Trajectory Designs.

Relationship of Vertebral Body Bone Mineral Density with Insertional Torque and Pull-out Strengths of Pedicle Screws and Its Clinical Significance

Craniocaudal cyclic load improve risk assessment of lumbar pedicle screw loosening：finite element analysis based on computer tomography

Biomechanical comparative study of midline cortical vs. traditional pedicle screw trajectory in osteoporotic bone

Biomechanical comparison of pedicle screw fixation strength among three different screw trajectories using single vertebrae and one-level functional spinal unit

Superior cortical screw in osteoporotic lumbar vertebrae: A biomechanics and microstructure-based study.

Finite Element Analysis of Cortical Bone Trajectory Screw Resistance to Pullout During Exposure to Different Cortical Layers Based on AbaqusCEA Software

Biomechanical Comparison of Fixation Stability among Various Pedicle Screw Geometries: Effects of Screw Outer/Inner Projection Shape and Thread Profile

Krag versus Caudad trajectory technique for pedicle screw insertion in osteoporotic vertebrae: biomechanical comparison and analysis.

Pullout performance comparison of pedicle screws based on cement application and design parameters

A Novel Screw Modeling Approach to Study the Effects of Screw Parameters on Pullout Strength.

A Biomechanical Study on Cortical Bone Trajectory Screw Fixation Augmented with Cement in Osteoporotic Spines.

Impact of screw tip design on screw anchorage: mechanical testing and numerical simulation

Craniocaudal toggling increases the risk of screw loosening in osteoporotic vertebrae

A Bicortical Pedicle Screw in the Cephalad Trajectory Is the Best Option for the Fixation of an Osteoporotic Vertebra: A Finite Element Study

A Study of Screw Placement to Obtain the Optimal Pull-out Resistance of Lumbar Pedicle Screws—analysis of Hounsfield Units Measurements Based on Computed Tomography

Lateral migration resistance of screw is essential in evaluating bone screw stability of plate fixation

Biomechanical comparison of a new undercut thread design versus the V-shape thread design for pedicle screws

Biomechanical Assessment of Different Transforaminal Lumbar Interbody Fusion Constructs in Normal and Osteoporotic Condition-A Finite Element Analysis

Percutaneous cortical bone trajectory screw fixation versus traditional open pedicle screw fixation for type A thoracolumbar fractures without neurological deficit