Abstract:This paper presents a clamping force sensor based on fiber Bragg grating (FBG) to provide interaction force feedback for laparoscopic surgery. The proposed sensor mainly consists of a force-sensitive clamping flexure and a tightly suspended optical fiber with an FBG inscribed. The force-sensitive clamping flexure utilizes a bridge-type structure with an excellent load-bearing capacity and anti-interference ability to linearly convert the vertical force or displacement input exerted on the grasping surface into translational deformation along the flexure central line. The FBG fiber is arranged along the flexure central axis to sense the vertical force-induced horizontal strain. This two-point pasting configuration can achieve a uniform fiber strain distribution and an enhanced sensitivity. This assembly arrangement produces a linear relationship between the applied vertical force and the force-induced horizontal strain value sensed by the FBG. The force sensitivity remains the constant and it less affected by the grasping positions due to the high stiffness and deformation conversion, overcoming the difficulty that the traditional clamping force sensor designs are sensitive to the grasping position due to the variable grasping positions and areas on the soft tissues during clamping. The finite element method (FEM)-based simulation has been utilized for design optimization and performance investigation to guide the sensor design. The simulation sensitivity values have been determined as a close value of 52pm/N regarding the three different grasping positions at middle, left and right parts. The optimized sensor design has been integrated into a manual surgical grasper and achieve experimental sensitivity values of 56.2pm/N, 51.1pm/N and 47.5pm/N for the three different loading positions within [0, 10N]. Both dynamic loading experiments and clamping experiments on ex-vivo tissues and in-vivo animal for tissue resection were implemented to validate the effectiveness of the proposed design.

Development of Fiber-Optic Triaxial Force Sensor for Guidewire Tip

Development of a Distal Tri-Axial Force Sensor for Minimally Invasive Surgical Palpation

Identification of tissue types and boundaries with a fiber optic force sensor

Triaxial Catheter-Tip Force Sensor for MRI-Guided Cardiac Procedures

A Miniature Triaxial Fiber Optic Force Sensor for Flexible Ureteroscopy

Puncture force sensor based on optic-fiber Fabry-Perot interferometer

Direct Measurement Vascular Interventional Surgery Force Feedback Sensor Model Based on Active Bending of the Guidewire

FBG-Based Sensorized Surgical Instrument for Force Measurement in Minimally Invasive Robotic Surgery

A Compact FBG-Based Triaxial Force Sensor With Parallel Helical Beams for Robotic-Assisted Surgery

A sub-millimetric, 0.25 mN resolution fully integrated fiber-optic force-sensing tool for retinal microsurgery

Triaxial MRI-Compatible Fiber-optic Force Sensor

The HPV response is different with constant pressure vs constant flow perfusion.

Development of a Fiber Bragg Grating-Enabled Clamping Force Sensor Integrated on a Grasper for Laparoscopic Surgery

A submillimetric 3-DOF force sensing instrument with integrated fiber Bragg grating for retinal microsurgery

FBG-Based Triaxial Force Sensor Integrated with an Eccentrically Configured Imaging Probe for Endoluminal Optical Biopsy

Thin-film-based optical fiber interferometric sensor on the fiber tip for endovascular surgical procedures

Total Force Analysis and Safety Enhancing for Operating Both Guidewire and Catheter in Endovascular Surgery

Tri-Axial MRI Compatible Fiber-optic Force Sensor

A High-Precision Miniature Triaxial FBG Force Sensor for Detecting Tissue Anomalies

A piezoresistive-based 3-axial MEMS tactile sensor and integrated surgical forceps for gastrointestinal endoscopic minimally invasive surgery

Miniaturized Piezo Force Sensor for a Medical Catheter and Implantable Device