Abstract:Garnet-based solid electrolytes are highly attractive because of their excellent ionic conductivity and electrochemical stability toward Li metal anodes. However, poor interfacial contact between the garnet electrolyte and electrode leads to a high interfacial impedance, and the resulting inhomogeneous interfacial current distribution expedites the growth of Li dendrites. Here, we propose a practical method to assemble dendrite-free solid-state batteries by coating SnS2 onto Li6.5La3Zr1.5Ta0.5O12 (LLZTO) pellets. The SnS2 layer promotes wettability, homogenizes the space electric field at the interface by an in situ conversion reaction, and can also be used as an excellent electrode. Using this method, we decreased the garnet/Li interfacial impedance to an ultralow extent of ∼17 Ω/cm2, while increasing the critical current density to 1.2 mA/cm2. The Li/2/SnS2 solid-state battery delivers a low interfacial impedance of ∼72 Ω/cm2, a high capacity of ∼717 mAh/g, and excellent cycling stability and rate performance. We believe that the understanding and manipulation strategy of the SnS2 coating layer will shed light on designing an excellent garnet/Li interface and assembling novel all-solid-state batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00193?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00193</a>.Details for the synthesis of LLZTO powders and pellets. SEM images and XRD patterns of 2 (Figure S1); electrochemical behaviors of the SnS2-coated symmetric cell (Figure S2); SEM images and elemental mappings of the cycled 2 (Figure S3); continuous polarization performance of the SnS2-coated symmetric cell (Figure S4); Sn 3d5/2 XPS spectra of SnS2 and 2 (Figure S5); XPS and XAS results of the cycled 2 (Figure S6); EIS profiles of the Li/LLZTO/SnS2 cell (Figures S7–8); CV curves of the Li/2/SnS2 ASSB (Figure S9); SEM images and elemental mappings of the Li/2/SnS2 ASSB after 100 cycles (Figure S10); and electrochemical behavior of the Li/2/SnS2@CNTs ASSB (Figures S11–12) (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00193/suppl_file/ae1c00193_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Low-cost molten salt coating enabling robust Li/garnet interface for dendrite-free all-solid-state lithium batteries

Facile Surface Modification Method to Achieve an Ultralow Interfacial Resistance in Garnet-Based Li Metal Batteries

Molten Salt Driven Conversion Reaction Enabling Lithiophilic and Air‐Stable Garnet Surface for Solid‐State Lithium Batteries

Garnet Electrolytes with Ultralow Interfacial Resistance by SnS 2 Coating for Dendrite-Free all-Solid-State Batteries

A Facile and Low-Cost Wet-Chemistry Artificial Interface Engineering for Garnet-Based Solid-State Li Metal Batteries

In-situ construction of multifunctional interlayer enabled dendrite-free garnet-based solid-state batteries

An in Situ-Formed LiI Interface Layer for Garnet-Based Lithium Metal Batteries

Restrained Li|Garnet Interface Contact Deterioration Manipulated by Lithium Modification for Solid‐State Batteries

In situ construction of a multifunctional interlayer for garnet-type electrolytes to suppress lithium dendrite formation in solid-state lithium batteries

Smart Construction of an Intimate Lithium | Garnet Interface for All‐Solid‐State Batteries by Tuning the Tension of Molten Lithium

Air-stable and Lithium-compatible Garnet Pellet Enabled by Surface Doping for High Performance Solid-state Batteries

In‐Situ Construction of Electronically Insulating and Air‐Stable Ionic Conductor Layer on Electrolyte Surface and Grain Boundary to Enable High‐Performance Garnet‐Type Solid‐State Batteries

In-situ construction of Li-Mg/LiF conductive layer to achieve an intimate lithium-garnet interface for all-solid-state Li metal battery

In Situ Fabrication of High Ionic and Electronic Conductivity Interlayers Enabling Long-Life Garnet-Based Solid-State Lithium Batteries

Built-in garnet-rich composite solid electrolyte towards fast ion transport and dendrite-free for high-energy lithium batteries

A lithium–tin fluoride anode enabled by ionic/electronic conductive paths for garnet-based solid-state lithium metal batteries

Lithium dendrites suppressed by low temperature in-situ anti-perovskite coated garnet solid-state electrolyte

Optimizing Li Ion Transport in a Garnet-Type Solid Electrolyte via a Grain Boundary Design

Tuning the Anode–Electrolyte Interface Chemistry for Garnet‐Based Solid‐State Li Metal Batteries

Achieving Efficient and Stable Interface Between Metallic Lithium and Garnet-Type Solid Electrolyte Through a Thin Indium Tin Oxide Interlayer

In Situ Lithiophilic Layer from H+/Li+ Exchange on Garnet Surface for the Stable Lithium-Solid Electrolyte Interface