Abstract:A promising solution to the storage of intermittent renewable energy is to integrate solid oxide electrolysis cells (SOEC) with solar/wind power. This trend necessitates comprehensive, quantitative investigations on the transient characteristics of SOEC, especially under varying power-supply conditions. For this purpose, a high-resolution, 3-dimensional, transient numerical model, as well as an adaptive time-stepping strategy, is proposed in this study. This study analyzes the electrical, gaseous, and thermal responses of SOEC to voltage ramps with different ramp rates and ramp magnitudes. The results show that electrical undershoots or overshoots occur after fast voltage changes. This phenomenon reflects the discrepancies between the steady and transient current–voltage characteristics and may lead to unsteady hydrogen production rates in practice. The electrical undershoots or overshoots are caused by the different transfer rates in SOEC – electronic/ionic transfer rate is faster than mass transfer rate, and mass transfer rate is faster than heat transfer rate. Furthermore, the electrical undershoots or overshoots can be divided into two parts. One part is related to mass-transfer lag, and the other part is related to heat-transfer lag. The former can be alleviated or eliminated by simply slowing down the voltage ramp, while the latter needs a more effective control strategy other than merely adjusting the voltage ramps. Apart from the electrical conditions, cell structure also has significant impacts on the electrical responses, e.g., the rib and the length of channel are related to the non-uniform electrical responses in the functional layer. Finally, via a quantitative technique developed from linear time-invariant systems, it is shown that the electrical responses of SOEC are governed by two time constants in the functional layer, namely the mass-transfer time constant (estimated as τm,H2O,FL=0.00723 s) and the heat-transfer time constant (estimated as τt,FL=180 s).

Research on Current Density Overshoot of Reversible Solid Oxide Cell During Mode Switching

Dynamic analysis of current overshoots in reversible solid oxide cells

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

Dynamic Simulation of a Reversible Solid Oxide Cell System for Efficient H2 Production and Power Generation

Numerical investigation of the transient performance of a reversible solid oxide cell during the mode switching process

Investigation of the Interaction Mechanism Between Power and Heat of a Reversible Solid Oxide Cell During a Mode Switching Cycle

Transient characteristics of a solid oxide electrolysis cell under different voltage ramps: Transport phenomena behind overshoots

Dynamic Processes of Mode Switching in Reversible Solid Oxide Fuel Cells

Dynamic Modeling and Parameter Analysis Study on Reversible Solid Oxide Cells During Mode Switching Transient Processes

Modeling and control-oriented thermal safety analysis for mode switching process of reversible solid oxide cell system

Recent Development in Reversible Solid Oxide Fuel Cells: Theory, Integration and Prospective

Mechanism of Rate-Limiting Step Switchover for Reversible Solid Oxide Cells in H2/H2O Atmosphere

A Study on Current Overshoot During Start-Ups and Optimal Start-Up Strategy of Proton Exchange Membrane Fuel Cells

The Correlation of EIS and Performance of Button-Size and Industrial-Size Planar SOFCs under Different Operating Conditions

Nonlinear model predictive control for mode‐switching operation of reversible solid oxide cell systems

Effect of Transient Hydrogen Evolution∕Oxidation Reactions on the OCV of Direct Methanol Fuel Cells

Dynamic response and safety performance of an anode-supported solid oxide electrolysis cell operating under electrical transients

Performance Evolution Analysis of a Solid Oxide Cell Operated in Fuel-Cell, Electrolysis and Cycle Modes

Functionally Graded Infiltration Triggering Ultrahigh Electrolytic Current in Robust Reversible Solid Oxide Cells

High-performance Oxygen Electrode for Reversible Solid Oxide Cells with Power Generation and Hydrogen Production at Intermediate Temperature

Occurrence of Power Overshoot for Two-Chambered Mfc at Nearly Steady-State Operation