Abstract:Solid oxide fuel cell (SOFC) is attracting attention as a next-generation eco-friendly power generation technology due to its advantages such as high efficiency and fuel flexibility. However, when exposed to electrical load changes, its performance deteriorates severely, which is an obstacle to commercialization. To solve this problem, many researchers study the phenomena that occur when SOFC is exposed to a dynamic load change, but the results reported in the literature seemingly conflict with each other. Some researchers report that the time it takes for SOFC to stabilize after a dynamic load change is within the 10 −1 s time scale (i.e., delayed response in the short-time scale), while others report that it takes the 10 2 s time scale to stabilize (i.e., delayed response in the long-time scale). This study aims to provide an integrated understanding of these conflicting reports through three-dimensional dynamic simulation. Simulation results confirm that the relaxation time scale of both the short-time scale and the long-time scale are not mutually exclusive but compatible according to the observed time scale. The dynamic response of SOFC on the short-time scale is determined by gas-phase mass transfer in the anode, and the response on the long-time scale is governed by heat transfer in the entire stack. The response of fuel concentration causes the delayed response of anode concentration overpotential on the short-time scale, and the response of temperature causes the delayed response of anode activation overpotential and ohmic overpotential on the long-time scale. As a result, the cell voltage shows delayed responses simultaneously in short- and long-time scales, respectively, due to the difference in response time between these overpotentials. To confirm the effect of transfer phenomena, additional simulations are conducted by changing the geometric parameters of the stack. It is confirmed that the dynamic responses of fuel concentration and anode concentration overpotential in the short-time scale are sensitive to the thickness of anode components, and the dynamic responses of temperature, anode activation overpotential, and ohmic overpotential at the long-time scale are sensitive to the entire stack length.

Dynamic analysis of current overshoots in reversible solid oxide cells

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

Dynamic Simulation of a Reversible Solid Oxide Cell System for Efficient H2 Production and Power Generation

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Dynamic Processes of Mode Switching in Reversible Solid Oxide Fuel Cells

Modeling and control-oriented thermal safety analysis for mode switching process of reversible solid oxide cell system

Multi-objective Optimizations of Solid Oxide Co-Electrolysis with Intermittent Renewable Power Supply Via Multi-Physics Simulation and Deep Learning Strategy

Transient characteristics of a solid oxide electrolysis cell under different voltage ramps: Transport phenomena behind overshoots

Dynamic Behavior of High-Temperature CO2/H2O Co-Electrolysis Coupled with Real Fluctuating Renewable Power

Dynamic response and safety performance of an anode-supported solid oxide electrolysis cell operating under electrical transients

Performance Analysis of a Reversible Solid Oxide Cell System Based on Multi-Scale Hierarchical Solid Oxide Cell Modelling

Control-oriented dynamic process optimization of solid oxide electrolysis cell system with the gas characteristic regarding oxygen electrode delamination

Control-oriented dynamic modeling and thermodynamic analysis of solid oxide electrolysis system

Recent Development in Reversible Solid Oxide Fuel Cells: Theory, Integration and Prospective

The dynamic response of solid oxide fuel cell fueled by syngas during the operating condition variations

Performance Evolution Analysis of a Solid Oxide Cell Operated in Fuel-Cell, Electrolysis and Cycle Modes

Elucidating the dynamic transport phenomena of solid oxide fuel cells according to rapid electrical load change operation

The Correlation of EIS and Performance of Button-Size and Industrial-Size Planar SOFCs under Different Operating Conditions

Dynamic modeling of reversible solid oxide cell stack and control strategy development

Modeling and optimal operation of reversible solid oxide cells considering heat recovery and mode switching dynamics in microgrids