Abstract:Solid oxide cell systems (SOCs) are increasingly being considered for electrical energy storage and as a means to boost the use of renewable energy and improve the grid flexibility by power-to-gas electrochemical conversion. The control of several variables (e.g., local temperature gradients and reactant utilization) is crucial when the stacks are used in dynamic operation with intermittent electrical power sources. In the present work, two 1D models of SOC stacks are established and used to investigate their dynamic behavior and to select and tune a suitable control strategy. Subsequently, safe operating ranges were determined to meet the thermal constraints of the stack by analysing not only the fuel cell (SOFC) and electrolyzer (SOEC) individual modes but also the switching between the two modes when the stack operates reversibly. The dynamic analysis shows that the control loops of our multi-input (reactant molar flow rates), multi-output (reactant utilization and maximum local temperature gradients) control system are strongly decoupled. Therefore, a proportional integral control strategy can be used to prevent dangerous stack operating conditions in dynamic operation. Finally, the controllers were tuned, and their transfer functions were reported. Convective heat transfer via air flow allows controlling the temperature of the solid structure of the cell/stack component, thus avoiding issues related to temperature variation during transient operation. Moreover, the reactant utilization controllers can avoid component fracture or degradation owing to fuel starvation under dynamic operation. The process can be approximated by two first order transfer functions. It can help in the design of more complex control systems in the future if necessary, with embedded process models, such as model predictive control. Results in the simulation environment are preparatory to the programming phase of an actual controller in real-world applications.

Nonlinear model predictive control for mode‐switching operation of reversible solid oxide cell systems

A Thermal Management Strategy for Proton Exchange Membrane Fuel Cell via Nonlinear Model Predictive Control

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

Nonlinear Model Predictive Control Based on the Moving Horizon State Estimation for the Solid Oxide Fuel Cell

Dynamic Simulation of a Reversible Solid Oxide Cell System for Efficient H2 Production and Power Generation

Time-Varying Model Predictive Control of a Reversible-SOC Energy-Storage Plant Based on the Linear Parameter-Varying Method

Nonlinear model predictive control of direct internal reforming solid oxide fuel cells via PDAE-constrained dynamic optimization

Transient Analysis and Safety-Oriented Process Optimization During Electrolysis–fuel Cell Transition of a Novel Reversible Solid Oxide Cell System

Modeling and control-oriented thermal safety analysis for mode switching process of reversible solid oxide cell system

Multi-model Predictive Control of Solid Oxide Fuel Cells

A Novel Adaptive Model Predictive Control Strategy of Solid Oxide Fuel Cell in DC Microgrids

Multiple model predictive control for solid oxide fuel cells

Dynamic Modeling and Parameter Analysis Study on Reversible Solid Oxide Cells During Mode Switching Transient Processes

Dynamic Modeling of Reversible Solid Oxide Cells

Multiple Model Predictive Hybrid Feedforward Control Of Fuel Cell Power Generation System

Modeling and Control of Multi‐Stack Fuel Cell Air System Based on Nonlinear Model Predictive Control Method

Dynamic modeling of reversible solid oxide cell stack and control strategy development

Current-based MPC for Operating-Safety Analysis of a Reduced-Order Solid Oxide Fuel Cell System

Numerical investigation of the transient performance of a reversible solid oxide cell during the mode switching process

Nonlinear Model Predictive Control of Sofc Based on A Hammerstein Model

Study on an Adaptive Multi-Model Predictive Controller for the Thermal Management of a SOFC-GT Hybrid System