Abstract:Mn4+ ion-doped red-emitting oxides are promising candidates for light-emitting-diode phosphors, but the formation and stabilization of Mn4+ in the oxide matrix remain a challenge due to the spontaneous reduction of Mn4+ to Mn2+. In this work, we demonstrate that the incorporation of Li+ can regulate the valence of Mn ions doped in spinel-phase ZnAl2O4 and enable tuning of the luminescence of Mn2+ and Mn4+ dopants. Both experimental and calculation results show that the incorporation of Li+ ions can lead to localized charge accumulation around themselves, thereby consuming the excess charges and suppressing the self-reduction of Mn4+. This finding allows for the realization of pure red emission of Mn4+ in ZnAl2O4 for the first time and the fabrication of a corresponding warm white-light-emitting-diode prototype. The Li+-dependent dual emission of Mn2+ (green) and Mn4+ (red) co-doped in ZnAl2O4 can be conveniently utilized to design a ratiometric optical thermometer with excellent visual responses. This work not only offers new atomistic insights into regulating the valence state of Mn ions but also provides an effective method for improving the performance of Mn4+-activated light-emitting-diode phosphors and devising a good phosphorescent probe for fluorescence-intensity-ratio temperature sensing.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.0c02547?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.0c02547</a>.Characteristics of the strongest XRD peak for L-ZAO:Mn; concentrations of elements for ZAO:Mn and L-ZAO:Mn determined by ICP-MS; Rietveld profiles and results of 0–20 wt % L-ZAO:Mn; SEM images of 0–20 wt % L-ZAO:Mn; PL spectra of ZAO and PL spectra of 0–20 wt % L-ZAO:Mn samples; XRD patterns and PL spectra of N-ZAO:Mn and K-ZAO:Mn; PL spectra of ZnAl2O4:Mn prepared with x wt % MgF2; decay curves and lifetimes of 0–15 wt % L-ZAO:Mn samples (λex = 322 nm, λem = 651 nm); diffuse reflection spectra of 0–15 wt % L-ZAO:Mn and ZAO matrix; XPS spectra of Zn 2p, Al 2p, and O 1s in ZAO:Mn and 15 wt % L-ZAO:Mn; XRD patterns and PL spectra of O-ZAO:Mn and LO-ZAO:Mn; XRD patterns of 15 wt % L-ZAO:Mn at 300–875 K; PL spectra and color coordinates of the 15 wt % L-ZAO:Mn sample at 298–423 K; calculated band gap of ZAO with the DRS data; integrated PL intensity of the 15 wt % L-ZAO:Mn sample in the heating and cooling cycle; XRD patterns and PL spectra (λex = 426 nm) of 5, 8, and 10 wt % L-ZAO:Mn; FIR values at 298 or 423 K in each cycle; and supplemental illustration of the charge balance (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c02547/suppl_file/cm0c02547_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Photoluminescence Properties and Mn4+ → Tm3+ Energy Transfer of La0.557li0.33tio3: Mn4+, Tm3+ for Thermometry and Nir-Led Applications

Insight into a Novel Rare-Earth-free Red-Emitting Phosphor Li3Mg2NbO6:Mn4+: Structure and Luminescence Properties

Tunable wide rectangular red fluorescence spectrum of Mn4+-doped Li3LaMgTiO6

Luminescence and Energy Transfer performances of Tb3+/Mn4+ co-doped Sr2LuTaO6 double perovskite phosphors for high sensitive optical thermometer

Mn4+-Activated Double-Perovskite-Type Sr2LuNbO6 Multifunctional Phosphor for Optical Probing and Lighting.

Double Perovskite A(2)LaNbO(6):Mn4+,Eu3+ (A = Ba, Ca) Phosphors: Potential Applications in Optical Temperature Sensing

Luminescence enhancement of Mn4+‐activated double perovskite phosphors for LEDs through a co‐replacement strategy

Localized Charge Accumulation Driven by Li + Incorporation for Efficient LED Phosphors with Tunable Photoluminescence

Li4Zn(PO4)2:Mn2+ thermosensitive phosphor with dual luminescent centres for optical thermometry

A Novel Multifunctional Double Perovskite Structure Phosphor La2mgtio6:Mn4+, Eu3+

Antithermal Quenching and Multiparametric Temperature Sensing from Mn2+/Tb3+‐Codoped Ca2LaTaO6 Phosphor

Structure analysis, tuning photoluminescence and enhancing thermal stability on Mn4+-doped La2-xYxMgTiO6 red phosphor for agricultural lighting

LED-pumped intense red luminescence based on Ba2LaTaO6: Mn4+ double perovskite phosphor

Optical Properties of La2MgSnO6: Eu3+/Mn4+ Double-Perovskite Phosphors for Multifunctional Applications

Temperature-dependent Luminescence of a Phosphor Mixture of Li2TiO3: Mn4+ and Y2O3: Dy3+ for Dual-Mode Optical Thermometry

Adjusting luminescence properties of ZnAl2O4:Mn2+(Mn4+), Li+ phosphors through cation substitution

Optical thermometry of a Tm3+/Yb3+ Co-doped LiLa(MoO4)2 up-conversion phosphor with a high sensitivity

Double perovskite La2LiNb(1-)O6: xMn4+ red phosphors with excellent humidity stability and high thermal stability for plant growth LEDs

Highly sensitive optical thermometer of Sm 3+ , Mn 4+ activated LaGaO 3 phosphor for the regulated thermal behavior

Ca2LaTaO6:Bi3+/Mn4+ Phosphors with High Brightness Far-Red Emitting and Luminescence Enhancement for Plant Growth LED Lights and Temperature Sensor

Customizing dual-functional platforms for solid-state lighting and luminescence lifetime thermometry with high sensing sensitivity