Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Ultrahigh Salt Adsorption Capacity of Carbonaceous Electrode in a Rocking-Chair Capacitive Deionization Through Surface Charge Modulation

Bismuth oxychloride nanostructure coated carbon sponge as flow-through electrode for highly efficient rocking-chair capacitive deionization

Tailoring the electrode material and structure of rocking-chair capacitive deionization for high-performance desalination

Enhanced Desalination Performance of Anion-Exchange Membrane Capacitive Deionization Via Effectively Utilizing Cathode Oxidation

In Situ Synthesis of Ultrasmall NaTi2(PO4)3 Nanocube Decorated Carbon Nanofiber Network Enables Ultrafast and Superstable Rocking-Chair Capacitive Deionization

Enhancing the Total Salt Adsorption Capacity and Monovalent Ion Selectivity in Capacitive Deionization Using a Dual-Layer Membrane Coating Electrode

Enhanced capacitive deionization of an integrated membrane electrode by thin layer spray-coating of ion exchange polymers on activated carbon electrode

Novel Inorganic Integrated Membrane Electrodes for Membrane Capacitive Deionization.

Prussian Blue Analogue Based Integrated Membrane Electrodes for Desalination and Selective Removal of Ammonium Ions in a Rocking-Chair Capacitive Deionization

In situ synthesis of ultrasmall NaTi 2 (PO 4 ) 3 nanocube decorated carbon nanofiber network enables ultrafast and superstable rocking-chair capacitive deionization

Electrosorptive removal of salt ions from water by membrane capacitive deionization (MCDI): characterization, adsorption equilibrium, and kinetics

Capacitive deionization(CDI)technology for desalination of sea water:properties of carbon electrode materials made of activated carbon and ion-exchange membranes

Controlled synthesis of bismuth oxychloride-carbon nanofiber hybrid materials as highly efficient electrodes for rocking-chair capacitive deionization

Enhanced Electrodesorption Performance via Cathode Potential Extension during Capacitive Deionization

Multiscale MXene Engineering for Enhanced Capacitive Deionization via Adaptive Surface Charge Tailoring

A Positive-Negative Alternate Adsorption Effect for Capacitive Deionization in Nano-Porous Carbon Aerogel Electrodes to Enhance Desalination Capacity

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

A Single-Electrode Evaluation Method Used for Analyzing the Working Mechanism and Capability of Integrated Membrane Capacitive Deionization

Deionization performance, desalination enhancement mechanism, desorption behavior and energy consumption analysis of biochar-based membrane capacitive deionization

Electrochemical capacitive desalination behavior of activated carbon fibers

Unleashing the power of capacitive deionization: Advancing ion removal with biomass-derived porous carbonaceous electrodes