Abstract:Capacitive deionization (CDI), a m ethod with notable advantages of relatively low energy consumption and environmental friendliness, has been widely used in desalination of saltwater. However, due to the weak electrical double-layer electrosorption of ions from water, CDI has suffered from low throughput capacity that may limit its commercial applications. Thus, it is of importance to develop a high-efficiency and engineering-feasible CDI process. Manganese and cobalt and their oxides, being faradic materials, have a relatively high pseudocapacitance, which can cause an increase of positive and negative charges on opposing electrodes. However, their low conductivity properties limit their electrochemical applications. Pseudocapacitive Mn3O4 nanoparticles encapsulated within a conducting carbon shell (Mn3O4@C) were prepared to enhance charge transfer and capacitance for CDI. Desalination performances of the Mn3O4@C (5-15 wt %) core-shell nanoparticles on activated carbon (AC) (Mn3O4@C/AC) serving as CDI electrodes have thus been investigated. The pseudocapacitive Mn3O4@C/AC electrodes with relatively low diffusion resistances have much greater capacitance (240-1300 F/g) than the pristine AC electrode (120 F/g). In situ synchrotron X-ray absorption near-edge structure spectra of the Mn3O4@C/AC electrodes during CDI (under 1.2 and -1.2 V for electrosorption and regeneration, respectively) demonstrate that reversible faradic redox reactions cause more negative charges on the negative electrode and more positive charges on the positive electrode. Consequently, the pseudocapacitive electrodes for CDI of saltwater ([NaCl] = 1000 ppm) show much better desalination performances with a high optimized salt removal (600 mg/g·day), electrosorption efficiency (48%), and electrosorption capacity (EC) (25 mg/g) than the AC electrodes (288 mg/g·day, 23%, and 12 mg/g, respectively). The Mn3O4@C/AC electrode has a maximum EC of 29 mg/g for CDI under +1.2 V. Also, the Mn3O4@C/AC electrodes have much higher pseudocapacitive electrosorption rate constants (0.0049-0.0087 h-1) than the AC electrode (0.0016 h-1). This work demonstrates the feasibility of high-efficiency CDI of saltwater for water recycling and reuse using the low-cost and easily fabricated pseudocapacitive Mn3O4@C/AC electrodes.

Enhancing the Total Salt Adsorption Capacity and Monovalent Ion Selectivity in Capacitive Deionization Using a Dual-Layer Membrane Coating Electrode

Multiscale MXene Engineering for Enhanced Capacitive Deionization via Adaptive Surface Charge Tailoring

Reducing Ohmic Resistances in Membrane Capacitive Deionization Using Micropatterned Ion-exchange Membranes, Ionomer Infiltrated Electrodes and Ionomer Coated Nylon Meshes

Enhancing the Desalination Performance of Capacitive Deionization Using a Layered Double Hydroxide Coated Activated Carbon Electrode

Sulfonated GO coated carbon electrodes with cation-selective functions for enhanced capacitive deionization of saltwater

Coupling ion-exchangers with inexpensive activated carbon fiber electrodes to enhance the performance of capacitive deionization cells for domestic wastewater desalination.

Battery Electrode Materials with Omnivalent Cation Storage for Fast and Charge-Efficient Ion Removal of Asymmetric Capacitive Deionization

Carbon electrode with cross-linked and charged chitosan binder for enhanced capacitive deionization performance

Enhancing capacitive deionization performance with charged structural polysaccharide electrode binders

Docked ions: Vertical-aligned tubular arrays for highly efficient capacitive deionization

Efficient dual-ions hybrid capacitive system for superior deionization with enhanced kinetics match

Deionization performance, desalination enhancement mechanism, desorption behavior and energy consumption analysis of biochar-based membrane capacitive deionization

A preliminary attempt at capacitive deionization with PVA/PSS gel coating as an alternative to ion exchange membrane

Electrosorptive Desalination by Carbon Nanotubes and Nanofibres Electrodes and Ion-Exchange Membranes

Pseudocapacitive Deionization of Saltwater by Mn3O4@C/Activated Carbon

Designing NiFe-metal organic frameworks@NiFe-layered double hydroxide/carbon fiber self-supporting electrode for enhanced capacitive deionization

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Desalination performance in versatile capacitive/battery deionization configurations using a cation intercalating electrode

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Effect of Hydrophilicity of Activated Carbon Electrodes on Desalination Performance in Membrane Capacitive Deionization

Constructing ionic highway in capacitive deionization via integrated electrodes based on bifunctional ionomer