Abstract:Conformal coating is a protective coating widely used for protecting printed circuit board (PCB) from harsh environmental conditions. The conformal coating's thickness is one of the key parameters for evaluating the quality of conformal coating, and thus the thickness needs to be measured before PCB assembling. In this paper, we proposed to utilize spectral domain optical coherence tomography (SD-OCT) combined with an image segmentation algorithm to achieve a rapid and non-destructive thickness measurement on conformal coating. The spectral domain OCT system was built with a broadband SLD light source (bandwidth; 180 nm) so that an axial resolution of 1.72,mu m was obtained. Meanwhile, an image segmentation algorithm based on boundary tracing was designed to segment the conformal coating in OCT image for rapid and accurate thickness measurement. To evaluate the proposed method, the measurement results in this paper were compared with the traditional metallographic examination, analyzing the consistency of the detected boundaries as well as the measured thickness between these two methods. In addition, we also compared the method proposed in this paper with the edge detection algorithm based on image gradient previously reported by our group in terms of the accuracy and efficiency, so as to justify the advantages of this newly developed method. The results show that the measurement method designed in this paper is in good agreement with the traditional metallographic method, and the thickness of the coating can be accurately measured. Based on the three-dimensional imaging capability of the system, the thickness topographic map of the conformal coating can be visualized clearly, which cannot be realized by the metallographic section method. Compared with the method proposed by our group previously, this method can provide more accurate and efficient measurement, paving the way for real-time and inline thickness measurement on conformal coating.

Modulated Step-Heating Thermography for Coating Thickness Measurement

Photothermal radiometry using normalized DC component for coating thickness evaluation

Thermographic evaluation of Coating Thickness with Different Modulation Waveforms

Non-destructive Evaluation of Uneven Coating Thickness Based on Active Long Pulse Thermography

Thickness evaluations for thin coatings using laser scanning thermography

Thickness evaluation of organic coating using active long-pulse transmission thermography

Radiative Thermal Coats for Passive Temperature Management

Spectral-domain Optical Coherence Tomography for Conformal Coating Thickness Measurement on Printed Circuit Board

Differential Evolution Fitting-Based Optical Step Phase Thermography for Micron Thickness Measurement of Atmospheric Corrosion Layer

Thermal measurement associated with material failure using thermochromic coatings

Application of Laser Scanning Infrared Thermography for Measuring Film Thickness

Topcoat Thickness Measurement of Thermal Barrier Coating Using Grating Laser Acoustic Spectrum Method

Ultrathin Radiation Coating Enabling High Accuracy and High Resolution Real-Time Infrared Imaging of Thermal MEMS Devices

Simultaneous Measurement of Thickness and Sound Velocity of Porous Coatings Based on the Ultrasonic Complex Reflection Coefficient

Theoretical and Experimental Study on Thermal Barrier Coating (tbc) Uneven Thickness Detection Using Pulsed Infrared Thermography Technology

A New Grating Thermography for Nondestructive Detection of Cracks in Coatings: Fundamental Principle

Photothermal measurement of material properties for translucent thermal barrier coatings

The Method of Ultrasonic Thickness Measurement for Surface Coatings Materials Based on Spectral Analysis

Study on Method for Measuring Coating Emissivity by Applying Active Irradiation Based on Infrared Thermal Imager

Bimodal Microwave Method for Thickness Estimation of Surface Coatings on Polymer Composites

Thickness Determination of Dual-Layer Coatings Based on Ultrasonic Spectral Filtering