Abstract:The principle of a lock-in thermography for non-destructive tests was researched and the evaluation,defect depth measurement and its application to the detection of honeycomb structure materials and welding bearings were introduced.A Finite Difference Model(FDM)of 2D heat conduction was established and it then was used to compute the temperature variety process on the surface of samples under the condition of sine law modulated heat flux.The lock-in processing method was applied to extract the quasi-steady state temperature variety of the defect and non-defect regions and the phase differences between them was computed.Furthermore,a thermal-electronic equivalence modeling was established by analog to the fundamental laws of heat and electricity,and it was used to simulate the lock-in thermography.The relation between defect depth and phase difference of both incident and reflected thermal waves was obtained.Finally,non-destructive tests were carried out on a honeycomb structure sample with simulated defects and a real welding bearing by the lock-in thermography.Experimental results indicate that the phase deference between defect and non-defect regions obtained by the finite difference model and thermal-electrical equivalence modeling is close to the experimental result,and the bias error is less than 5% as well.The lock-in thermography can rapidly and exactly detect defect sizes and positions,and can be also used in the measurement for the curve surface of a structure.

Thermographic evaluation of Coating Thickness with Different Modulation Waveforms

Modulated Step-Heating Thermography for Coating Thickness Measurement

Radiative Thermal Coats for Passive Temperature Management

Numerical Analysis of Thermal Response of Mid-Infrared High Reflectance Coating under Different Laser Irradiation Angles

Barker-coded Modulation Laser Thermography for CFRP Laminates Delamination Detection

Photothermal radiometry using normalized DC component for coating thickness evaluation

Thickness evaluations for thin coatings using laser scanning thermography

Thickness evaluation of organic coating using active long-pulse transmission thermography

Technology of linear frequency modulation infrared thermal-wave imaging for nondestructive testing

Non-destructive Evaluation of Uneven Coating Thickness Based on Active Long Pulse Thermography

Non-linear frequency modulated thermal wave imaging for subsurface analysis

Research on Thermal Wave Processing of Lock-in Thermography Based on Analyzing Image Sequences for NDT

Frequency domain analysis of the thermal wave imaging system

Thermal Wave Detection and Defect Depth Measurement Based on Lock-in Thermography

Multimode infrared thermal-wave imaging in non-destructive testing and evaluation (NDT&E): Physical principles, modulated waveform, and excitation heat source

Logarithmic Frequency Modulated Thermal Wave Imaging for Subsurface Analysis

Research on Lock-in Thermography for Aerospace Materials of Nondestructive Test Based on Image Sequence Processing

Application of Laser Scanning Infrared Thermography for Measuring Film Thickness

Absorption measurements in optical coatings by lock-in thermography

Quantitative Characterization of Interfacial Defects in Thermal Barrier Coatings by Long Pulse Thermography

Investigation on Coating Uniformity of High-Temperature Alloy with SiC Thermal Barrier Coating Using Pulsed Infrared Thermographic Technique