Abstract:A wavelength scanning interferometer for measuring the surface and thickness of a transparent film has been studied. A halogen light source combined with an acousto-optic tuneable filter is used to generate a sequence of filtered light in a Linnik interferometer, which leads to a sequence of interferograms captured by a CCD camera. When a transparent thin film is measured, the reflection signals from both the top and bottom surfaces of the film will interfere with the reference signal. At the same time, the multiple reflection signals between the two film surfaces will also interfere with each other. Effective separation of the interference signals from each other is the key to achieving a successful measurement. By performing a frequency-domain analysis, these interference signals can be separated. An optimized Fourier transform method is used in the analysis. Measurements of the top and bottom surface finishes of the film, as well as the film thickness map, have been achieved. The film needs to be more than 3 µm in optical path length, and must transparent with no absorption of light. The film's refractive index needs to be known as a function of wavelength. In this paper, the theoretical analysis and simulation study of wavelength scanning interferometry for transparent film measurement is discussed. Experiments on thin film layers of Parylene N coated on a glass slide surface are studied and analyzed. Comparison study results with other contact and non-contact methods are also presented.

Application of Laser Scanning Infrared Thermography for Measuring Film Thickness

Thickness evaluations for thin coatings using laser scanning thermography

Film thickness measurement by double-wavelength infrared transmittance method

The Study of Film Thickness Measurement by Laser Induced Fluorescence

A Measuring System of Film Thickness Based on Atomic Force Microscope

Design of On-Line Measurement System of Film Thickness Based on Infrared Technology

Study On The Measurement Of Thin Film Thickness With Fringe Scanning Method

Measurement of In-Plane Thermal Diffusivity of Thin Films Using Laser Periodic Heating Method with Non-Research-grade Infrared Camera and Thermocouple Detectors

Application of Planar Laser-induced Fluorescence Technique in Measurement of Dynamic Film Thickness

Surface and Thickness Measurement of a Transparent Film Using Wavelength Scanning Interferometry.

Thickness microscopy based on photothermal radiometry for the measurement of thin films.

Thickness evaluation of organic coating using active long-pulse transmission thermography

Thin Film Thickness Measurement of Whole Field Based on Spatial Carrier Frequency Interferometry

Non-contact measurement of plastic film thickness

White Light Interferometry with Spectral-Temporal Demodulation for Large-Range Thickness Measurement

Film Thickness Measurement Based on Nonlinear Phase Analysis Using a Linnik Microscopic White-Light Spectral Interferometer

Research on the Calculation of Film Thickness Based on UV-visible Spectrum

Infrared Thermography of Complex 3D Printed Components

Non-destructive Evaluation of Uneven Coating Thickness Based on Active Long Pulse Thermography

A New Interferometer for Measuring Ultra-Small Thickness and Spacing

Study on Thin Film Thickness Measurement Method Based on Digital Image Processing