Abstract:Extensive experimental research and hydrodynamic models have been proposed to guide the design of superior packings. However, most research has concentrated on the effective void (epsilon - H) of packing while ignoring the ineffective void (epsilon - H - HL), which causes discrepancies in hydrodynamic performance compared to actual observations. This study evaluated the hydrodynamic performance under diverse conditions considering the liquid holdup (H), pressure drop (Delta P), and gas flooding velocity (uf). A novel approach to hydrodynamic model construction is introduced by incorporating an ineffective void. The results indicate that at a constant hold-up area, liquid flow (L) and viscosity (mu) significantly influence liquid hold up, moderated by the gas velocity in the flooding area. The pressure drop rises as the viscosity, gas flow rate, and liquid flow rate increase. Notably, a considerable pressure drop initiates flooding at the bottom of the absorber. Elevated liquid flow rates and viscosities correlate with higher ineffective void values (HL) in the packing column. At low gas flow rates, the gas flow rate marginally affects HL values. However, after the flooding point was achieved, the values of HL rapidly increased as the gas flow rate increased. Moreover, a linear relationship emerges between the liquid holdup and HL, as evidenced by the consistent variation in the liquid holdup and the F-factor. Utilizing the ineffective void yields a more accurate fit for the experimental data, reducing the average absolute relative deviation to 10.2%, 7.4%, and 10.8%, respectively.

New Insight and Experimental Study of Ineffective Void in Hydrodynamic Performance of Countercurrent‐flow Packing Column

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

Hydrodynamics in Bubble Columns with Pin-Fin Tube Internals

CFD simulation of bubble column with vertical bundle internals

Hydrodynamics of New Structured Packings: an Experimental and Micro-scale CFD Study

Experimental Study on the Influence of Velocity on Hydraulic Characteristics in Reactor Lower Plenum

Investigation of countercurrent flow profile and liquid holdup in random packed column with local CFD data

Liquid Holdup for Two-Phase Countercurrent Flow in the Packed Column with a Novel Internal

Modeling of the Minimum Fluidization Velocity and the Incipient Fluidization Pressure Drop in a Conical Fluidized Bed with Negative Pressure

Studies on a New Random Packing—Plum Flower Mini Ring

Portraying the Countercurrent Flow on Packings by Three‐Dimensional Computational Fluid Dynamics Simulations

Liquid Film Wavy Motion and Its Relation to Flooding Phenomena for Counter-Current Gas-Liquid Flow in a Narrow Channel of a Packed Column

Packing Size Effect on the Liquid Circulation Property in an External-Loop Packed Bubble Column

Hydrodynamics of Gas–liquid Flow in Micropacked Beds: Pressure Drop, Liquid Holdup, and Two‐phase Model

Experimental and CFD analysis of two-phase cross/countercurrent flow in the packed column with a novel internal

Comparison of Methods of Prediction of Flooding Velocities for Packed Liquid Extraction Columns

Intensification of Random Packing Via CFD Simulation, PIV Measurement and Traditional Experiments

Effects of internals on macroscopic fluid dynamics in a bubble column

Hydrodynamic Modeling on the External Liquid–solid Wetting Efficiency in a Trickling Flow Reactor

Three-dimensional Computational Fluid Dynamics Modeling of Two-phase Flow in a Structured Packing Column

Experiment and Simulation Study on the Effect of Internals in Gas–Liquid Bubble Columns with a Low Aspect Ratio