Abstract:It has been generally acknowledged that the configuration of a gas distributor has significant impact on fluid dynamics and mixing in shallow bubble column reactors.This study employs computational fluid dynamics (CFD)-based models to simulate transient gas-liquid flow in a large-scale shallow cylindrical bubble column of 800mm in diameter at the superficial gas velocity of 0.1m/s.An Eulerian-Eulerian two-fluid model along with the stand k-e turbulence model is adopted to simulate flow generated by gas sparged through five different multiple-pipe gas distributors which the four pipes are uniformly mounted at different distribution rings with ring to bubble column diameter ratios of 0.3,0.4,0.5,0.6 and 0.7.Multiple-Size-Group (MUSIG) model is also employed in the simulation to account for bubble break-up and coalescence.The effects of the diameter of distribution rings for allocating gas sparging pipes in the gas distributor on hydrodynamics,gas hold-up,mixing,turbulence and bubble size is systematically investigated.The simulation results clearly show that gas hold-up and mixing characteristics in the bubble column are affected by the ring to bubble column diameter ratio.It is demonstrated that the mixing time and overall gas hold-up increase with the increase of ring to bubble column diameter ratio initially but decrease with further increasing such ratio.It is found from the simulation that the optimum ring to bubble column diameter ratio is about 0.4 for the best gas hold-up distribution and such a ratio of 0.5 corresponds the longest mixing time.The CFD modelling results also reveal that the flow pattern inside the bubble column is dominated by single circulation when ring to bubble column diameter ratio is smaller than 0.5 while double-circulation flow appears when the ratio is larger than 0.5,thus impairing the mixing in the bubble column.A comparison has been presented between the simulation and the experimental data.

Experiment and Simulation Study on the Effect of Internals in Gas–Liquid Bubble Columns with a Low Aspect Ratio

Cfd Simulation of Bubble Dynamics in Bubble Columns with Internals

Hydrodynamics in Bubble Columns with Pin-Fin Tube Internals

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

CFD simulation of bubble column with vertical bundle internals

Study on bubble size distribution and local gas holdup in bubble column

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Impact of gas distributor configuration on hydrodynamics in bubble column with pipe internals

Experiment and Numerical Simulation of the Motion of Bubble Swarm in a Bubble Column

2-D Hydrodynamic Model of Bubble Column Based on Lateral-Force Balance

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

CFD Simulation of Gas-Liquid Flow in Bubble Column

Experimental Measurement and Theoretical Analysis on Bubble Dynamic Behaviors in a Gas-Liquid Bubble Column

CFD simulation of effects of the configuration of gas distributors on gas–liquid flow and mixing in a bubble column

Numerical Simulations Of Fluid Dynamics And Mixing In A Large Shallow Bubble Column: Effects Of The Sparging Pipe Allocations For Multiple-Pipe Gas Distributors

Influence of Short-Draft Tube on Fluid Dynamics in Bubble Column with CFD

Application of CFD Simulation for Optimisation of the Multi-Pipe Gas Distributors in a Large-Scale Shallow Bubble Column

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Effects of internals on macroscopic fluid dynamics in a bubble column

Numerical Simulation of Gas-Liquid Two-Phase Flow at Various Inlet Positions in Bubble Column at Low Gas Velocity