Abstract:This study presents a convenient and cost-effective technology for fabricating flexible thin-film, integrative whole-Teflon microflu-idic chips. By employing micro embossing techniques, we created micropatterns on a thin FEP film (~50 µm), which were then sealed with another flat FEP thin film (~200 µm) to form microchannels. This approach enables rapid prototyping of lab-on-a-film FEP microchips using minimal equipment and at a low cost. Our microfluidic chip stands out due to two key factors: one is inherit-ed from the Teflon material, and the other is that the entire microchip is a very thin film. The combination of these factors provides distinct advantages, including exceptional chemical resistance, high transparency and flexibility, and efficient heat transfer. We developed an adhesive-free, tight-fit, and solvent-resistant interconnector to interface the FEP thin-film microdevices with the mac-roscopic world for stable fluid delivery. Microvalves are integrated into our Teflon microfluidic film chips, which are easy to oper-ate for fluid manipulation. As a proof of concept, we demonstrated the versatility and enhanced performance of our transparent FEP microfluidic film chips through an on-chip photochemical reaction. These FEP microfluidic film chips offer powerful and diverse features that expand the capabilities of microfluidics, making them an attractive option for a wide range of applications such as biosensing, portable detection, wearable electronics, and organic reactions.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a convenient, low - cost and scalable technology for manufacturing flexible thin films and integrated all - Teflon microfluidic chips. Specifically, the author aims to overcome the limitations of traditional microfluidic chips, such as mechanical rigidity, poor chemical compatibility, adsorption of biomolecules, intolerance to organic solvents and difficulty in connecting with the outside world. ### Main problems and solutions 1. **Limitations of traditional microfluidic chips**: - **Mechanical rigidity**: Traditional microfluidic chips are usually made of relatively thick materials (such as glass, silicon, PDMS, etc.), resulting in poor flexibility. - **Poor chemical compatibility**: Traditional materials are prone to adsorb small molecules and biomolecules, affecting experimental results. - **Intolerance to organic solvents**: Many traditional materials are unstable when in contact with organic solvents. - **Difficulty in connecting with the outside world**: Traditional microfluidic chips are difficult to stably connect with the macroscopic world for fluid transfer. 2. **Advantages of Teflon materials**: - **Chemical inertness**: Teflon materials have excellent tolerance to almost all chemicals and solvents. - **Low adsorptivity**: Teflon materials hardly adsorb molecules, reducing interference. - **High transparency**: FEP (fluorinated ethylene - propylene copolymer) and PFA (perfluoroalkoxy) are transparent thermoplastic Teflon materials, suitable for photochemical reactions and real - time biological analysis. - **Resistance to extreme temperatures and UV radiation**: Enhancing the overall stability. 3. **Innovative microfluidic chip manufacturing methods**: - **Micro - imprinting technology**: Micro - patterns are formed on a 50 - μm - thick FEP thin film by high - temperature micro - imprinting technology, and these micro - channels are sealed with another 200 - μm - thick planar FEP thin film. - **Adhesive - free connectors**: A robust, universal, adhesive - free connector has been developed to ensure stable fluid transfer and solve the problem of the inert surface of Teflon materials. - **Integrated micro - valves**: Taking advantage of the flexibility of FEP thin films, an easy - to - operate "click" micro - valve has been designed for convenient fluid control. 4. **Application verification**: - **On - chip photochemical reactions**: Through a specific example - the benzyl bromination reaction, the high efficiency and superior performance of the FEP microfluidic thin - film chip in photochemical synthesis are demonstrated. Experiments show that the yield of the FEP thin - film chip in photochemical reactions is significantly higher than that of traditional bulk chips. ### Summary This research proposes an innovative, low - cost, convenient and scalable method for manufacturing all - Teflon microfluidic thin - film chips. This method not only inherits the excellent characteristics of Teflon materials but also overcomes the limitations of traditional microfluidic chips, providing new possibilities for microfluidic technology in fields such as biosensing, portable detection, wearable electronic devices and organic synthesis.

Whole-Teflon Lab on a Film

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

Embellishment of Microfluidic Devices Via Femtosecond Laser Micronanofabrication for Chip Functionalization

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Fabrication of Transparent and Flexible Digital Microfluidics Devices

Rapid Prototyping of Multi-Functional and Biocompatible Parafilm®-Based Microfluidic Devices by Laser Ablation and Thermal Bonding

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Facial Fabrication of Paper-Based Flexible Electronics with Flash Foam Stamp Lithography

Demonstration of a Transparent and Adhesive Sealing Top for Microfluidic Lab-Chip Applications

Soft tubular microfluidics for 2D and 3D applications

Lab-on-a-print: from a single polymer film to three-dimensional integrated microfluidics.

A Simplified Microfabrication Technology For Production Of Glass Microfluidic Chips

Microfabrication of A Digital Microfluidic Platform Integrated with an On-Chip Electrochemical Cell

Composite Elastomer-Enabled Rapid Photofabrication of Microfluidic Devices

Fused Deposition Modeling of Chemically Resistant Microfluidic Chips in Polyvinylidene Fluoride

Low-cost rapid prototyping for microfluidics using Parafilm®-based microchannels for low resource settings

A new soft lithographic route for the facile fabrication of hydrophilic sandwich microchips.

Integration of Functional Microstructures Inside a Microfluidic Chip by Direct Femtosecond Laser Writing

Rapid prototyping of thermoset polyester microfluidic devices