Abstract:Silica aerogels have attracted widespread attention for their distinct nanoporous networks, composed of interconnected silica nanoparticles and high-volume nanosized pores. Nonetheless, producing silica aerogels with low costs and simple processes still remains a considerable challenge. Herein, the mesoporous silica aerogels were prepared from inorganic silicon source through the freeze-drying. Using sodium silicate as the silica precursor, the gel was formed by the ion exchange and sol-gel in sequence. The regeneration of the weak acidic ion exchange resin produced the sodium acetate solution, which can be potentially used as carbon source for sewage treatment. To eliminate the collapse of microstructure of the silica hydrogel during freeze-drying, the tert-butanol aqueous solution was used as the freeze-drying medium. Particularly, the direct mixing of tert-butanol and silica sol to generate wet gel avoids prolonged and material-consuming solvent replacement. The pore structure of mesoporous silica aerogel can be adjusted by changing the concentration of tert-butanol solution. The 18 wt% tert-butanol solution results in the most favorable mesoporous structure of silica aerogel, owing to the eutectic behavior within the gel, which was verified by differential scanning calorimetry (DSC) analysis, and also due to the superior and uniform mesoporous structure of wet gel, which was validated by the cryogenic scanning electron microscopy (cryo-SEM) observation. Under optimal process conditions, the obtained silica aerogel exhibited a high porosity (97.74%) and typical mesoporous structure with the large pore volume (4.84 cm3·g-1) and an average pore diameter of 24.40 nm. The proposed cost-effective preparation strategy could elevate the potentials for large scale applications of silica aerogels in the fields of thermal insulation for building, industrial catalysis and adsorption, etc.

Preparing High-Quality Monolithic Carbon Nanotubes Reinforced Silica Aerogel Composites Based on a Vacuum Freeze-Drying Method

Facile Preparation of Carbon Nanotube Aerogels with Controlled Hierarchical Microstructures and Versatile Performance

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

A Facile Strategy for Freeze-Drying Preparation of Silica Aerogel from Sodium Silicate

Low-Temperature Synthesis of Monolithic Titanium Carbide/Carbon Composite Aerogel

High-strength carbon nanotube fibers with near 100% purity acquired via isothermal vacuum annealing

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Synthesis of Carbon Nanotubes by Decomposing Alcohol

Preparation of Surface-Modified Carbon Nanotubes/Silica Composite Gel Glass

Pore structure, thermal insulation and compressive property of ZrO 2 nanofiber aerogels with carbon junction fabricated by freeze drying

Ultralight Multiwalled Carbon Nanotube Aerogel.

Preparation of the Novel B4C–SiC Composite Aerogel with High Compressive Strength and Low Thermal Conductivity

Cellulose Nanofibril (CNF) Based Aerogels Prepared by a Facile Process and the Investigation of Thermal Insulation Performance

Fabrication of Large Aerogel-Like Carbon/Carbon Composites with Excellent Load-Bearing Capacity and Thermal-Insulating Performance at 1800 °C

Ultrasound‐assisted freeze‐drying strategy to enhance nanoparticle dispersion in aerogels: A case study on polyimide/silica nanocomposite aerogel

ZrC/C aerogel with high compressive strength by a carbothermic process

Synthesis and characterization of ambient-dried microglass fibers/silica aerogel nanocomposites with low thermal conductivity

Facile preparation of lightweight and robust carbon aerogel monoliths for high-temperature thermal insulation and oil-water separation

Preparation of the methyltriethoxysilane based aerogel monolith with an ultra-low density and excellent mechanical properties by ambient pressure drying

Freeze‐drying Method Prepared UHMWPE/CNTs Composites with Optimized Micromorphologies and Improved Tribological Performance

Flexible and Compressible Nanostructure-Assembled Aramid Nanofiber/Silica Composites Aerogel