A novel compatible truss-arch model to predict shear strength of concrete-encased steel composite columns
Yicong Xue,Chongxin Shang,Yong Yang,Yunlong Yu,Zhanjie Wang
DOI: https://doi.org/10.1007/s10518-022-01490-0
IF: 4.556
2022-08-13
Bulletin of Earthquake Engineering
Abstract:Concrete-encased steel (CES) composite columns, in which a steel shape is encased in a reinforced concrete (RC) section, have been widely applied in high-rise buildings as primary load-carrying members. However, CES columns with low shear span-to-depth ratio are prone to brittle shear failure under earthquake excitation, which is highly concerned by researchers and code-writers. In current design codes, formulas for predicting the shear strength of CES columns are based on the so-called "superposition method," indicating that the shear strength can be obtained by superimposing the shear strengths of the RC part and the steel shape. Nevertheless, this method yields errors on the unsafe side because the shear strengths of these two parts cannot be achieved simultaneously. In this paper, a novel compatible truss-arch model is proposed, in which the shear contribution of the RC part is obtained using the traditional truss-arch model and that of the steel shape is determined by plasticity theory. Considering the deformation compatibility between the steel shape and the RC part, these two parts are coordinated to predict the shear strength of CES columns. Finally, a database is built using the test results consisting of 39 CES columns to compare the proposed model with current design formulas. The results indicate that the proposed model can reasonably predict the shear strength of CES columns, and the calculation methods from the codes AISC 360, Eurocode 4, AS/NZS 2327, and JGJ 138 are all inferior in the calculation accuracy due to the lack of compatibility condition.
geosciences, multidisciplinary,engineering, geological