Abstract:Summary The deformation capacities of columns, which are the main lateral force‐resisting elements of reinforced concrete (RC) structures, have been the subject of great interest with the development of performance/displacement‐based seismic design. However, deterioration due to chloride‐induced corrosion causes a significant reduction in the seismic performance of RC columns. Although numerous investigations have focused on the deformation capacity of columns with corroded rebars and various strengthening measures have been proposed, little attention was paid to evaluating the contribution of each deformation component to the tip displacement under corrosion (i.e., bending, shear, and longitudinal bar slip at the column footing), which plays an important role in investigating and explaining the failure mechanisms of columns. This paper presents a computational prediction model to estimate the deformation capacity of RC columns with corroded rebars, and the contributions of bending and bar slip at the column footing are mainly considered in this model due to the negligible contribution of the shear deformation component for columns subjected to flexural failure mode. The calculation results obtained by the prediction model are compared with the quasistatic test results of both noncorroded and corroded RC columns. It turns out that the prediction model simulates the deformation capacity of RC columns with corroded rebars reasonably well considering its simplicity and computational efficiency, and it can be used for time‐variant capacity estimates for the lifetime seismic design and fragility assessment of RC columns exposed to corrosion.

Time-Dependent Load Bearing Capacity of Corroded Rc Columns in Atmosphere Environment

Mechanical Degradation of Reinforced Concrete Columns Corroded Under Sustained Loads

Analytical Model for Concrete Jacketed RC Columns with Precorrosion and Postcorrosion Damages under Uniaxial Loading

Performance of Corroded Reinforced Concrete Columns under the Action of Eccentric Loads

Simplified Structural Deterioration Model for Reinforced Concrete Bridge Piers under Cyclic Loading 1

Effects of Reinforcement Corrosion and Sustained Load on Mechanical Behavior of Reinforced Concrete Columns.

Time-dependent reliability analysis of reinforced concrete beams subjected to bending and marine atmospheric environment

Axial Loading Capacity Of Concrete-Jacketed Rc Columns With Pre- And Post-Corrosion Damage

FLEXURAL CAPACITY OF CORROSION-DAMAGED RC BEAMS

Modeling of Time to Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Study on Degradation Regularity of Bearing Capacity of RC Beams under Corrosive Conditions

Acoustic Emission Analysis of Corroded Reinforced Concrete Columns under Compressive Loading.

Acoustic Emission Study on the Damage Evolution of a Corroded Reinforced Concrete Column under Axial Loads

Residual strengths of reinforced concrete beams with heavy deterioration

Behavior of Corrosion Damaged Circular Reinforced Concrete Columns under Cyclic Loading

Cover Cracking Model in Reinforced Concrete Structures Subject to Rebar Corrosion

Corrosion-crack path based probabilistic model to predict the durability behavior of RC components

Finite element analysis of deterioration of axial compression behavior of corroded steel-reinforced concrete middle-length columns

Hysteretic Model for Corroded Rectangular Reinforced Concrete Bridge Column Under Seismic Loading

Reinforcement Corrosion-Induced Cover Cracking and Its Time Prediction for Reinforced Concrete Structures

Prediction for lateral deformation capacity of corroded reinforced concrete columns