Abstract:As a key factor affecting thermal behaviors of liquid hydrogen (LH2) tanks, heat leakage plays an important role in accurate prediction of pressure build-up for safe storage and transportation of LH2. Uniform heat flux between vapor and liquid in LH2 tanks is widely adopted as thermal boundary condition in predicting pressure build-up process. However, a distribution of heat flux between vapor and liquid was observed during the self -pressurization process in the experimental test. In light of this, an analytically theoret-ical model of revealing the energy exchange process among the vapor, liquid and inner wall is proposed to investigate the heat leakage distribution ratio (HDR) between vapor and liquid in LH2 tanks. The feasibility of the model is validated by the experimental results from NASA. In the whole self-pressurization process of 25,000 s, HDR reduces from 0.803 to 0.235 under a liquid fill ratio of 90% and a total heat leakage of 71.3 W. The results show that the existence of inner wall and different thermal properties between the vapor and liquid make the heat leakage flux non-uniformly distributed into the vapor and liquid. And the geometric structure of tank, thermal properties and initial states of the vapor and liquid have a significant effect on HDR. When coupling the model with thermal multi-zone model, the relative error in pressure prediction is reduced by 61.8% against experimental results. Benefiting from the coupled model, the relative error in pressure prediction caused by the uniform heat flux boundary condition reduces from 90.16% to 8.15%. The present work establishes theoretical foundation on analyzing heat leakage distribution between the vapor and liquid for LH2 tanks, and provides useful guidance on modifying boundary conditions in accurately predicting thermal behaviors of LH2 tanks.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Experimental investigation on reactivation characteristics of liquid–metal heat pipes after hydrogen inactivation

CFD modeling of liquid-metal heat pipe and hydrogen inactivation simulation

Research on Improving the System Sensitivity for Hot Helium Leak Test

Experimental Study on a Hydrogen Closed Loop Pulsating Heat Pipe with Different Adiabatic Lengths

Experimental Study on a Hydrogen Pulsating Heat Pipe in Different Heating Modes

Theoretical investigation on heat leakage distribution between vapor and liquid in liquid hydrogen tanks

Experimental Study on a Hydrogen Closed-Loop Pulsating Heat Pipe with Two Turns

Effects of Different Heat Transfer Conditions on the Hydrogen Desorption Performance of a Metal Hydride Hydrogen Storage Tank

Perspective for the Safe and High-Efficiency Storage of Liquid Hydrogen: Thermal Behaviors and Insulation

Experimental and computational fluid dynamic investigation on thermal behaviors of liquid hydrogen during the no-vented storage process: A literature review

Experimental investigation on the temperature characteristics and hydrogen elimination effect of non-premixed hydrogen-oxygen recombination reaction at ambient temperature

Experimental Investigation on a Pulsating Heat Pipe with Hydrogen

Experimental Study on the Detection of Frozen Diffused Ammonia Blockage in the Inactive Section of a Variable Conductance Heat Pipe

A review of liquid metal high temperature heat pipes: Theoretical model, design, and application

The Effect of Heating Rate on the Reversible Hydrogen Storage Based on Reactions of Li3alh6 with Linh2

Experimental investigations on steam-air-hydrogen condensation and corresponding component separation phenomenon

Numerical Study of Heat Transfer and Fluid Flow Characteristics of a Hydrogen Pulsating Heat Pipe with Medium Filling Ratio

Liquid Sn corrosion behaviors to high-flux hydrogen plasmas irradiated Mo capillary-pore systems

Experimental study on the temperature dependence of gaseous hydrogen permeation and hydrogen embrittlement susceptibility of X52 pipeline steel

Study on the mechanical properties of X80 pipeline steel under pre-charged high-pressure gaseous hydrogen

Liquid metal activated hydrogen production from waste aluminum for power supply and its life cycle assessment