Numerical Study of Heat Transfer and Fluid Flow Characteristics of a Hydrogen Pulsating Heat Pipe with Medium Filling Ratio

Dongyu Yang,Zhicheng Bu,Bo Jiao,Bo Wang,Zhihua Gan
DOI: https://doi.org/10.3390/en17112697
IF: 3.2
2024-06-03
Energies
Abstract:Benefiting from its high thermal conductivity, simple structure, and light weight, the pulsating heat pipe (PHP) can meet the requirements for high efficiency, flexibility, and low cost in industrial heat transfer applications such as aerospace detector cooling and vehicle thermal management. Compared to a PHP working at room temperature, the mechanism of a PHP with hydrogen as the working fluid differs significantly due to the unique thermal properties of hydrogen. In this paper, a two-dimensional model of a hydrogen PHP with a filling ratio of 51% was established to study the flow characteristics and thermal performance. The volume of fluid (VOF) method was used to capture the phase distribution and interface dynamics, and the Lee model was employed to account for phase change. To validate the model, a comparison was conducted between the simulation results and experimental data obtained in our laboratory. The simulation results show that the pressure and temperature errors were within 25% and 5%, respectively. Throughout a pressure oscillation cycle, the occurrence of uniform flow velocity, acceleration, and flow reversal can be attributed to the changes in the vapor–liquid phase distribution resulting from the effect of condensation and evaporation. In addition, when the fluid velocity was greater than 0.6 m/s, dynamic contact angle hysteresis was observed in the condenser. The results contribute to a deeper understanding of the flow and heat transfer mechanism of the hydrogen PHPs, which have not been yet achieved through visualization experiments.
energy & fuels
What problem does this paper attempt to address?
This paper aims to study the heat transfer and fluid flow characteristics of Hydrogen Pulsating Heat Pipe (PHP) under medium filling ratios. Specifically, the paper attempts to address the following key issues: 1. **Understanding the working mechanism of hydrogen PHP**: Due to the unique thermal properties of hydrogen, its mechanism as a working fluid differs significantly from PHPs operating at room temperature. The paper delves into the flow characteristics and thermal performance of hydrogen PHP by establishing a two-dimensional model. 2. **Validating the model's effectiveness**: By comparing the simulation results with laboratory experimental data, the paper verifies whether the established model can accurately describe the behavior of hydrogen PHP. The results show that the pressure and temperature errors are within 25% and 5%, respectively, proving the model's effectiveness. 3. **Revealing flow and phase change patterns**: The simulation reveals that during the pressure oscillation cycle, the occurrence of uniform flow velocity, acceleration, and flow reversal phenomena are closely related to changes in the vapor-liquid phase distribution, which are caused by condensation and evaporation effects. Additionally, when the flow velocity exceeds 0.6 m/s, a dynamic contact angle hysteresis phenomenon is observed in the condenser. 4. **Compensating for the lack of visualization experiments**: Due to the difficulty of conducting visualization experiments in low-temperature environments, numerical simulation becomes an effective alternative. This study helps to gain a deeper understanding of the flow and heat transfer mechanisms of hydrogen PHP, which is challenging to achieve through visualization experiments. In summary, the main objective of this paper is to study the flow and heat transfer characteristics of hydrogen PHP under medium filling ratio conditions through numerical simulation methods and to validate the model's effectiveness, thereby providing theoretical support for the development of efficient cryogenic thermal management technologies.