Abstract:In this paper, a new process for the phase-separated P2O5-Al2O3 glass with SiO2-rich region is presented. The new method combines pneumatic atomization with mechanical stirring based on melting-quenching preparation. X-ray diffraction, Nano-infrared spectra, X-ray photoelectron spectra, Raman scattering spectra and atomic force microscope were carried out to investigate sample's structure and surface morphology. The results show that the phase-separated glasses consist of second phase, transition region and matrix region. The average diameter of separated phase, ie. 500 nm, 150 nm, 76 nm and 85 nm, depends on the diameter of SiO2 glass particles prepared by ball milling, that is 50 mu m, 10 mu m, 2 mu m and 400 nm respectively. Especially, transition region is formed by the connection of phosphorus oxygen tetrahedron and silicon oxygen tetrahedron, located between SiO2 region and matrix network region. After introducing the second phase, the Young's modulus of matrix glass was increased by 32.5% and the optimal value is 77.67 GPa within the scope of this experiment. It is attributed to that the formation of transition region increases the cross-linking of P2O5-Al2O3 glass network. The Young's modulus of the phase-separated glass increases with the diameter of the quartz glass particles decreases from 50 mu m to 2 mu m, but weakens at a diameter of 400 nm. The network polymerization due to increasing in the number of P3 units induced by second phase's diameter is responsible for rising in the Young's modulus, whereas too low diameter leads to particle agglomeration accompanied by the present of defects.

Study on the Mechanism of Second Phase Formation in High-Purity Fused Silica Materials for Semiconductor Application

High temperature nucleation of oxygen precipitates in Germanium-doped Czochralski silicon

From Phase Separation to Nanocrystallization in Fluorosilicate Glasses: Structural Design of Highly Luminescent Glass-Ceramics

A Novel Method for Preparing Phase-Separated P2O5–Al2O3 Glass with High Young's Modulus

Numerical and experimental investigation on iron contamination of 200 mm semiconductor-grade CZ-Si by bubble-free layer of quartz crucible

Kinetics of Phase Separation of Soda-Lime-silica Glass with Minor P2O5 Additions

Grown-in Defects in Heavily Phosphorus-Doped Czochralski Silicon

Modeling Phase Separation Mechanisms in Oxy‐fluoride Glass‐ceramics Containing SrF2:Ln3+ and ZnAl2O4:Cr3+ Nanocrystals

Formation Mechanism of Bubbles in the Crack Healing Process of Fused Silica Using a CO2 Laser

Formation mechanism of composite secondary phase particles in a solution-treated Si-modified Zircaloy-4

Synergistic regulation of color and mechanical properties of silicon nitride ceramics via engineering hollow structures of Eu-enriched secondary phases

Phase-Separation and Crystallization in Fluorozirconate Glasses

Long-Term Stability of Novel Crucible Systems for the Growth of Oxygen-Free Czochralski Silicon Crystals

Microstructure and Crystallization Behavior of Glasses in the ZrO2-ZnO-Al2O3-SiO2 System

Microstructure and crystallization behavior of glasses in the ZrO 2-ZnO-Al2O3-SiO2 system

Low‐temperature bubble formation in silica glass

Micron-size bubble defects in fused silica and its laser induced damage near 355 nm

Microstructure and phase evolution behavior of SiZrBC ceramic precursors synthesized via sol–gel method

Research Progress on Subsurface Defects in Fused Silica

Homogenization and Growth Behavior of Second-Phase Particles in a Deformed Zr–Sn–Nb–Fe–Cu–Si–O Alloy

Investigation of Oxygen Behavior under Different Melt Flow, Diffusion Boundary Layer, and Crystal-Melt Interface in a 300 mm Silicon Crystal Growth with Cusp Magnetic Field