Abstract:With the development of new energy, the photovoltaic industry has attracted widespread attention. In response to perovskite solar cells, a device structure is proposed, consisting of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate(PEDOT:PSS)/methylammonium lead iodide (MAPbI3)/tin oxide(SnO2)/aurum(Au) from top to bottom. By software testing the key parameters affecting the performance of perovskite solar cells, the cells are optimized, and the photoelectric conversion efficiency reached 25.78%. This lays the foundation for the subsequent preparation of efficient perovskite solar cells. Methylammonium lead iodide (MAPbI3) is a kind of perovskite material, which can effectively absorb photons in sunlight, with an adjustable band gap and relatively stable performance. Aiming at the problem of photoelectric conversion efficiency of perovskite solar cells, this paper proposes a perovskite solar cell with MAPbI3 as an absorption layer. The device structure adopts a trans structure with good stability and low cost, and the hole transport layer adopts poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate(PEDOT:PSS) material, which has good electrical properties and interface properties, and has certain transparency. The electron transport layer adopts tin oxide (SnO2), and its energy band structure is beneficial to carrier transport, and it has excellent electron transport performance and chemical stability, which makes it a material for the electron transport layer. The top electrode and the bottom electrode are made of indium tin oxide (ITO) and aurum (Au) with high reliability respectively. The thickness, band gap, and defect concentration of the battery are simulated by solar cell capacitance simulator (SCAPS) software. The results show that the thickness and band gap of the absorption layer has great influence on the performance of the battery. The open‐circuit voltage, short‐circuit current density, filling factor and photoelectric conversion efficiency of the optimized perovskite solar cell reached 1.219 V, 30.1641 mA cm−2, 70.14%, and 25.78% respectively.

Optimizating TiO2 Electron Transport Layer for MAPbBr3 Perovskite Solar Cells by Way of Ga Doping

Enhancing the Performance of MAPbI3-Based Perovskite Solar Cells Fabricated Under Ambient Air: Effect of Cu, Ni, and Zn Doping into TiO2

Charge transfer enhancement of TiO2/perovskite interface in perovskite solar cells

Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells

Surface Modification of TiO2 for Perovskite Solar Cells

Tuning the Fermi-level of TiO 2 mesoporous layer by lanthanum doping towards efficient perovskite solar cells

An Energy Level Alignment Strategy to Boost the Open-Circuit Voltage Via a Mg:TiO2 Compact Layer in the Planar Heterojunction CsPbBr3 Solar Cells

Enhancing Perovskite Solar Cell Performance Through Surface Engineering of Metal Oxide Electron-Transporting Layer

An energy level alignment strategy to boost the open-circuit voltage via a Mg:TiO<sub>2</sub> compact layer in the planar heterojunction CsPbBr<sub>3</sub> solar cells

Designing Organic Electron Transport Materials for Stable and Efficient Performance of Perovskite Solar Cells: A Theoretical Study

Single-Layered MXene Nanosheets Doping TiO 2 for Efficient and Stable Double Perovskite Solar Cells

Preliminary exploration of the influence of N+/NH+ ions/groups bombardment at TiO2 ETLs on performance of MAPbI3 perovskite solar cells

Construction of Efficient Cs2AgBiBr6 Perovskite Solar Cells by Enhancing Hole‐Selective Contact with Deep‐Level Dopant‐Free Hole Transport Material

Study on Performance Optimization of Perovskite Solar Cells Based on MAPbI3

Performance optimization of homojunction perovskite solar cells by numerical simulation

Enhanced Performance of Planar Perovskite Solar Cells Using Low-Temperature Processed Ga-doped TiO 2 Compact Film As Efficient Electron-Transport Layer

Inhibiting Li+ migration by thenoyltrifluoroacetone toward efficient and stable perovskite solar cells

Surface Lattice Perturbation of Electron Transport Layer Reducing Oxygen Vacancies for Positive Photovoltaic Effect

Efficient Bifacial Passivation with Crosslinked Thioctic Acid for High‐Performance Methylammonium Lead Iodide Perovskite Solar Cells

Recent Advances in Metal Oxide Electron Transport Layers for Enhancing the Performance of Perovskite Solar Cells

Bifunctional Interface Engineering by Oxidating Layered TiSe 2 for High-Performance CsPbBr 3 Solar Cells