A versatile fabrication route for screening block copolymer membranes for bioprocessing

Stefan Guldin,Ke Meng,Alberto Alvarez-Fernandez,Daniel G. Bracewell

DOI: https://doi.org/10.26434/chemrxiv-2024-9vqjf

2024-04-25

Abstract:Traditional polyethersulfone (PES) filters, widely used for sterile, viral and ultrafil- tration often exhibit limited selectivity-permeability due to the heterogenous pore size distribution. Such limitations have sparked interest in developing novel isoporous mem- brane materials and fabrication techniques to overcome the selectivity-permeability upper bound. Among several promising candidates, block copolymer membranes pro- duced via the self-assembly and non-solvent induced phase separation (SNIPS) method offer distinct advantages, such as customisable pore size, narrow dispersity, high poros- ity and mechanical flexibility. However, achieving the desired structure formation in SNIPS remains a complex optimisation procedure, rendering this approach unsuitable for the rapid screening of new block copolymer candidates. This study explores a direct spin coating method to fabricate a poly(styrene)-block- poly(methyl methacrylate) (PS-b-PMMA) thin film composite membrane, integrating a block copolymer layer with rigid anodic aluminium oxide (AAO) support. The pro- cess involves depositing the polymer solution onto a water-filled AAO substrate via spin coating. Compared with the SNIPS method, this fabrication process greatly re- duces the complexity of optimisation to yield an isoporous membrane structure for filtration purposes. We present this approach as a straightforward and reliable plat- form method for the rapid screening and evaluation of block copolymer membranes in their initial development stages. When compared to commercial PES membranes with similar molecular weight cut-offs, these novel PS-b-PMMA thin film composite membranes showed similar transmission rates for Bovine Serum Albumin and a Mon- oclonal Antibody while providing a 9 fold enhancement in Thyroglobulin rejection. This indicates a superior performance in terms of cut-off precision. The membranes demonstrate potential for the removal of viruses and antibody aggregates in the down- stream processing of monoclonal antibody production, which could reduce the burden of chromatographic polishing steps. An advance which offers promise for improving efficiency and reducing costs in biopharmaceutical manufacturing.

Chemistry

What problem does this paper attempt to address?

This paper mainly discusses the issue of screening block copolymer membranes for filtration in bioprocessing. Traditional polysulfone (PES) filtration membranes often have limited selectivity and permeability due to uneven pore size distribution in sterile, viral, and ultrafiltration processes. To address this problem, researchers are developing new porous membrane materials and manufacturing techniques to improve the upper limit of selectivity and permeability. The paper introduces a direct spin-coating method for preparing polystyrene-poly(methyl methacrylate) (PS-b-PMMA) thin film composite membranes by combining the block copolymer layer with a rigid anodic aluminum oxide (AAO) support layer. This method simplifies the optimization complexity in the SNIPS method by depositing the polymer solution onto a water-saturated AAO substrate through spin-coating, making it easier to prepare a porous membrane structure. Compared to commercial PES membranes, these new PS-b-PMMA thin film composite membranes show similar transmission rates for bovine serum albumin and monoclonal antibodies at similar molecular weight retentions, but exhibit a 9-fold increase in rejection of thyroglobulin, demonstrating higher retention accuracy. This indicates their superior performance in downstream bio-pharmaceutical processing, particularly in the removal of viruses and antibody aggregates, potentially reducing the burden of chromatographic refinement steps, improving efficiency, and reducing costs. Experimental results show that membranes prepared by this direct spin-coating method have the potential to become a reliable platform for rapid screening and evaluation of block copolymer membranes in early development stages. Filtration experiments with proteins and nanoparticles of different molecular sizes have demonstrated the potential of PS-b-PMMA TFC membranes in differentiating between molecules of different sizes, especially in the separation of antibodies and thyroglobulin, with a molecular weight retention range between 100 kDa and 300 kDa.

A versatile fabrication route for screening block copolymer membranes for bioprocessing

Sustainable additive manufacturing of polysulfone membranes for liquid separations

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Comb-shaped Amphiphilic Triblock Copolymers Blend PVDF Membranes Overcome the Permeability-Selectivity Trade-off for Protein Separation

Surface Engineering of Low-Fouling and Hemocompatible Polyethersulfone Membranes Via In-Situ Ring-Opening Reaction

Fabrication of Polysulfone-Based Microfiltration Membranes and Their Performance Analysis

A Robust Way to Prepare Blood-Compatible and Anti-Fouling Polyethersulfone Membrane

A simple method to prepare modified polyethersulfone membrane with improved hydrophilic surface by one-pot: The effect of hydrophobic segment length and molecular weight of copolymers

Synthesis of Well-Defined PVDF-Based Amphiphilic Block Copolymer via Iodine Transfer Polymerization for Antifouling Membrane Application

Mechanically strong, anti-fouling and pH-resistant isoporous membranes prepared from chemically designed new block copolymers

Excellent Biocompatible Polymeric Membranes Prepared Via Layer‐by‐layer Self‐assembly

Biocompatibility of Modified Polyethersulfone Membranes by Blending an Amphiphilic Triblock Co-Polymer of Poly(Vinyl Pyrrolidone)-B-Poly(Methyl Methacrylate)-B-Poly(Vinyl Pyrrolidone)

Selective separation of similarly sized proteins with tunable nanoporous block copolymer membranes

A Novel Approach for the Development of Low-Cost Polymeric Thin-Film Nanocomposite Membranes for the Biomacromolecule Separation

Versatile Antifouling Polyethersulfone Filtration Membranes Modified Via Surface Grafting of Zwitterionic Polymers from a Reactive Amphiphilic Copolymer Additive.

Hemocompatibility and ultrafiltration performance of surface-functionalized polyethersulfone membrane by blending comb-like amphiphilic block copolymer

Fabrication of a novel hollow fiber composite membrane with a double-layer structure for enhanced water treatment

Porous polymeric membranes: fabrication techniques and biomedical applications

Highly efficient nanofibrous sterile membrane with anti-BSA/RNA-fouling surface via plasma-assisted carboxylation process

Zwitterionic nanospheres engineered co-polymer composite membrane for precise protein-protein separation via dynamic self-assembly micelle deposition

Fabrication Of Pes/Pvp Water Filtration Membranes Using Cyrene (R), A Safer Bio-Based Polar Aprotic Solvent