Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Design of a Novel PMSM Topology with the Same Number of Poles and Slots

Design Optimization and Performance Investigation of Linear Doubly Salient Slot Permanent Magnet Machines

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Comparative Study of Novel Doubly Fed Doubly Salient PM Machines with Different Stator/Rotor-Pole Number Combinations

Influence of Stator Topologies on Average Torque and Torque Ripple of Fractional-Slot SPM Machines with Fully Closed Slots

Comparative Study of Modular Dual 3-phase Permanent Magnet Machines with Overlapping/Non-overlapping Windings

Research on Winding MMF Harmonics of the PMSM with the Same Number of Poles and Slots

Analysis of a Novel Linear Doubly Salient Slot Permanent Magnet Motor

Design and Analysis of a Novel High-Speed Permanent Magnet Machine with Dual Semi-Cage Winding

Design and Optimization of a Novel Permanent Magnet Linear Motor with the Same Number of Poles and Slots

A Novel High-Speed Permanent Magnet Machine with Dual Semi-Cage Winding

Analysis of Dual PM Vernier Machines with Different Consequent-Pole PM Topologies

A Novel Structure of Doubly Salient Permanent Magnet Machine

A Manufacturing Oriented Topology Optimization Methodology for Permanent Magnet Synchronous Motor

Analysis of MMF of the PMSM with the Same Number of Poles and Slots Considering Different Number of Winding Turns

Investigation of A Novel Phase-Unit Axial-Modular Permanent Magnet Vernier Machine with Integral-Slot Non-Overlapping Concentrated Windings

Slot/Pole Number Combination Research of-PM Linear Motors With Fractional Slots per Pole

Research on Torque Characteristics of the PMSM with the Same Number of Poles and Slots

Research on cogging torque characteristics of permanent magnet synchronous machines with the same number of poles and slots

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor