Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Analysis of a Novel Linear Doubly Salient Slot Permanent Magnet Motor

Design Optimization and Performance Investigation of Linear Doubly Salient Slot Permanent Magnet Machines

Comparative Study of Novel Doubly Fed Doubly Salient PM Machines with Different Stator/Rotor-Pole Number Combinations

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Design and Electromagnetic Performance Analysis of Novel Dual-Armature Π-Core Doubly Salient Permanent Magnet Machines

Improved Analytical Modeling of a Novel Ironless Linear Synchronous Machine With Asymmetrical Double-Layer Winding Topology

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

A Novel Structure of Doubly Salient Permanent Magnet Machine

A Novel Structure of Doubly Salient Permanent Magnet Machine in Square Envelope

Slot/Pole Number Combination Research of-PM Linear Motors With Fractional Slots per Pole

Analysis of a Novel Double-Sided Yokeless Multitooth Linear Switched-Flux PM Motor

Design and Optimization of a Novel Permanent Magnet Linear Motor with the Same Number of Poles and Slots

Investigation of a 12Slots-22Poles Novel Linear Permanent Magnet Vernier Motor with Spoke Structure

Design and Analysis of a 500W 120000rpm High-Speed Permanent Magnet Motor

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

A Novel Linear Hybrid-Excited Slot Permanent Magnet Machine With Dc-Biased Sinusoidal Current

Comparative Study of Novel Doubly-Fed Linear Switched Flux Permanent Magnet Machines with Different Primary Structures

Design and Analysis of A Trilateral Permanent Magnet Linear Synchronous Motor with Slotless Ring Windings for Transport Systems

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

Modeling of a Novel 12-Stator-Pole/10-Rotor-Tooth Doubly-Fed Flux-Switching Permanent Magnet Machine