Abstract:Inductively coupled plasma generator is one of the core components of the near-space high-speed target plasma electromagnetic scientific experimental research device, which is often used to simulate high enthalpy and high speed plasma sheath environment. In order to study the discharge characteristics of inductively coupled plasma generator under high power, radio frequency and medium pressure, the numerical simulation and experiment are combined to study its internal heat transfer and flow characteristics in this paper. Based on the local thermodynamic equilibrium conditions, the numerical simulation of large-scale radio frequency and medium pressure inductively coupled plasma with a power of 100–400 kW is carried out through the multi-field coupling of flow, electromagnetic and temperature field, and verified by light intensity and spectrum experiment. The results show that the electromagnetic field distribution in the high-power thermal balance inductively coupled plasma generator is similar to that of the small- and medium-sized power plasma generator. The discharge energy dissipation occurs mainly in the area where the induction coil is located. The temperature of the inner wall of the quartz tube is higher at the coil location than in other areas, and the plasma has a ring-shaped high-temperature structure. The outer wall of the quartz tube is set to be the boundary condition of heat flux for simulating the temperature change of the quartz tube under cold blowing. This setting is in coincidence with factual situations. The wall temperature of the quartz tube at the entrance and at the induction coil section are found to be relatively high. When the large-size inductively coupled plasma generator works, an obvious return vortex is generated at the entrance due to the temperature difference and the electromagnetic pumping effect, and the exit velocity increases slightly with the increase of power. At the same time, the discharge experiment under the corresponding conditions shows that there is found a ring structure with bright edges and dark centers in the axial image of the argon discharge. Moreover, the emission spectrum of argon plasma is measured through the spectrum diagnosis system and the spatial distribution of the generator electron temperature is obtained. The light intensity of the discharge image and the electron temperature measured by the spectrum are found to be in comparative coincidence with the COMSOL simulation temperature result, demonstrating the validity of the numerical simulation results under thermodynamic equilibrium conditions. The numerical simulation results in this paper are also applicable to the optimization design and temperature resistance evaluation of the inductively coupled plasma generator.

Study of High-Power Gridless Inductive Output Tube with L-Shaped Cavity

Comparative Study of Collectors for High-Power Gridless Inductive Output Tube

Comprehensive design and whole-cavity simulation of a multi-beam inductive output tube using a 3rd harmonic drive on the grid

Comprehensive Design and Whole-Cavity Simulation of a Multibeam Inductive Output Tube Using a 3rd Harmonic Drive on the Grid

Investigation of a Multi-Gap, High-Voltage Isolator for a Gyro-TWT With Depressed Collector

A Compact V-Band Transit Time Oscillator with Reflective Modulation Cavity

Investigation on a compact cavity-type microwave ion source

Power Enhancement of 0.22-THz Extended Interaction Oscillator Based on Orthogonal Interconnection Structure With Output Coupler

PIC Simulation of a Conventional W-band Gyrotron Oscillator

Study of a 0.34-THz Ladder-Type Extended Interaction Klystron With Narrow Coupling Cavities

Investigations on the Output System of 300-GHz Gyrotrons

Design and Cold Test of a G-Band 10-kW-Level Pulse TE 01 -Mode Gyrotron Traveling-Wave Tube

An Efficient Inverted Relativistic Magnetron With Virtual Cathode

Power Enhancement of Subterahertz Extended Interaction Oscillator Based on Overmoded Multigap Circuit and Linearly Distributed Two Electron Beams

The High-Order Coalesced TM 11 -Like Mode Operation for 220 GHz Sheet Beam Traveling-Wave Tube

Multiphysics Modeling of Insert Cooling System for a 170-GHz, 2-MW Long-Pulse Coaxial-Cavity Gyrotron

Study of a Dual-Mode Multibeam Interaction Circuit With Coaxial Structure for Ka-Band High-Power EIK

Demonstration of a Ka-Band Oversized Coaxial Multi-Beam Relativistic Klystron Amplifier for High Power Millimeter-Wave Radiation

Mid-Range Wireless Power Transfer at 100 MHz using Magnetically-Coupled Loop-Gap Resonators

A 29.5 Dbm OOB IIP3 TIA Based on a Two-Stage Pseudo-Differential OTA with R-C Compensation and Cascode Negative Resistance

Numerical Simulation and Experimental Study of High-Power Thermal Equilibrium Inductively Coupled Plasma