Abstract:In this article, the design and power capacity investigation of the gyrotron traveling wave tube (gyro-TWT) with more than 100 kW continuous-wave (CW) in Q -band are described. An input coupler is designed with a photonic bandgap isolator to ensure a wide bandwidth and low microwave leakage. A nonuniform dielectric-loaded circuit (DLC) is proposed to address the severe microwave loss in lossy ceramics at high power levels. The curved depressed collector with a multigap output isolator provides an effective approach to further enhance the overall efficiency and power capacity of high-frequency gyro-TWTs. An output window, equipped with boundary heat transfer channels, is employed to improve mechanical strength. Simulation results indicate that the Q -band TE $_{{\text{01}}}$ mode gyro-TWT, driven by a 55 kV–9.1 A electron beam (3.2% transverse velocity spread), can produce a maximum output power of 145 kW, with a gain of 74 dB and an overall efficiency of 40% at 48.5 GHz. The power output exceeding 100 kW is achieved in the 47–50 GHz range, with an overall efficiency of over 30%. With the efficient thermal management system, the maximum temperature on the DLC, collector, and output window are 190 $^{\circ}$ C, 241 $^{\circ}$ C, and 134 $^{\circ}$ C, respectively. The simulation results demonstrate the feasibility of the gyro-TWT for more than 100 kW CW stabilized operation.

Design and Cold Test of a G-Band 10-kW-Level Pulse TE 01 -Mode Gyrotron Traveling-Wave Tube

Design and Experiment of a 200-kW Q -Band Gyro-TWT

Design of a High-Gain $X$ -Band Megawatt Gyrotron Traveling-Wave Tube

Design of a Ku-band 110-Kw TE11 Mode Gyrotron Traveling Wave Tube Amplifier

Design and Experiment of a High Average Power Ku-Band TE 01 Mode Gyro-TWT

Design and Experiment of a High Power and Broadband Ku-Band TE11 Mode Gyro-TWT

Design of a W-band TE01 mode gyro-TWT amplifier with a lossy ceramic-loaded circuit

Design and Simulation of High-Power K-band Gyro-TWT

Theory and Experimental Study of a 400kw Ku-band Gyro-Twt

Design and Power Capacity Investigation of a Q-Band 100-Kw-continuous-wave Gyro-TWT

Design and Preliminary Experiment of W-Band Broadband TE02 Mode Gyro-TWT

Experiment and Power Capacity Investigation for a Ku-Band Continuous-Wave Gyro-TWT

Design and Experiment on a 95-GHz 400 kW-Level Gyrotron

Design Of A Ka-Band Te01 Mode Gyrotron Traveling-Wave Amplifier With High Power Capabilities

Design and Measurement of a Mode-Suppression Circuit for a G-Band Gyrotron Traveling Wave Tube

Theory and Experiment Investigate of a 400-Kw Ku-Band Gyro-TWT with Mode Selective Loss Loading Structure

The Design of a 16ghz TE01Gyrotron Traveling Wave Amplifier

Simulation and Experiment of a Ku-Band Gyro-TWT

Design and Experiment of a Q-band Gyro-TWT Loaded with Lossy Dielectric

Design and experiment of a 34GHz TE01 gyro-TWT

Design and Simulation of a Ka-Band TE 11 Mode Gyro-Traveling-Wave Amplifier